Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM Volume 08.03 - Plastics (III):D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products
ASTM Volume 08.03 - Plastics (III):D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products
PUBLIKÁCIE vydaná dňa 1.7.2017
| Dostupnosť | Vypredané |
| Cena | NA OTÁZKU bez DPH |
| NA OTÁZKU |
Informácie o produkte:
Označenie: ASTM Volume 08.03 - Plastics (III):D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products
Počet strán: 1522
Približná hmotnosť: 4597 g (10.13 libier)
Dátum vydania: 1.7.2017
Krajina: Americká publikácia
Anotácia textu normy:
These three volumes, 08.01 through 08.03, feature over 480 plastics-related standards, including test methods that establish standard procedures for assessing physical, mechanical, optical, permanence, and thermal properties.Volume 08.03 also covers:
Plastic Building Products—standards deal with plastic siding products, glass-fiber-reinforced polyester plastic panels, and PVC building products.
Reinforced Plastic Piping Systems and Chemical Equipment—covers testing requirements for glass-fiber-reinforced thermosetting resin pipes, fittings, and joints; and establish chemical resistance of thermosetting resins.
Table of Contents
| C581-15 | Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| C582-09(2016) | Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment |
| D1494-12 | Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
| D2105-01(2014) | Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| D2143-15 | Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe |
| D2310-06(2012) | Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| D2517-06(2011) | Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings |
| D2924-12(2017) | Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| D2925-14 | Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| D2992-12 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| D2996-15 | Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| D2997-15 | Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| D3262-16 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| D3299-10 | Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| D3517-14 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| D3567-97(2011) | Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings |
| D3678-14 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
| D3679-13 | Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding |
| D3681-12e1 | Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
| D3753-12e1 | Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells |
| D3754-14 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| D3839-14 | Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
| D3840-14 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
| D3841-16 | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
| D3982-08(2014) | Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts |
| D4024-15 | Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| D4068-17 | Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane |
| D4097-01(2010) | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| D4161-14 | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
| D4167-15 | Standard Specification for Fiber-Reinforced Plastic Fans and Blowers |
| D4226-16 | Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products |
| D4477-16 | Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
| D4495-16 | Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
| D4551-12 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane |
| D4726-15 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors |
| D4756-15 | Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit |
| D4803-10(2018)e1 | Standard Test Method for Predicting Heat Buildup in PVC Building Products |
| D5117-09 | Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock |
| D5132-11 | Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles |
| D5138-16 | Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
| D5155-14e1 | Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
| D5204-13 | Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials |
| D5205-16 | Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
| D5206-13 | Standard Test Method for Windload Resistance of Rigid Plastic Siding |
| D5207-14 | Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
| D5208-14 | Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
| D5224-12 | Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds |
| D5225-14 | Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer |
| D5226-16 | Standard Practice for Dissolving Polymer Materials |
| D5227-13 | Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins |
| D5260-16 | Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
| D5272-08(2013) | Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics |
| D5279-13 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion |
| D5296-11 | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
| D5319-12 | Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
| D5336-15a | Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials |
| D5338-15 | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures |
| D5364-14 | Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units |
| D5365-12 | Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| D5418-15 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam) |
| D5419-14a | Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures |
| D5420-16 | Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
| D5421-15 | Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| D5422-09 | Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer |
| D5436-15 | Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
| D5477-11 | Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) |
| D5491-08(2014) | Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials |
| D5492-10 | Standard Test Method for Determination of Xylene Solubles in Propylene Plastics |
| D5507-99(2012) | Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography |
| D5508-16 | Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC) |
| D5511-12 | Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| D5523-15 | Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates |
| D5526-12 | Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions |
| D5575-07(2013) | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| D5576-00(2013) | Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) |
| D5577-94(2010)e1 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| D5592-94(2010) | Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
| D5594-98(2012) | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| D5628-10 | Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) |
| D5629-16 | Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers |
| D5630-13 | Standard Test Method for Ash Content in Plastics |
| D5672/D5672M-15 | Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique |
| D5675-13(2018) | Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders |
| D5677-17 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| D5685-11 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
| D5740-16 | Standard Guide for Writing Material Standards in the Classification Format |
| D5813-04(2012) | Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems |
| D5814-10 | Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test |
| D5857-15 | Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
| D5870-16 | Standard Practice for Calculating Property Retention Index of Plastics |
| D5926-15 | Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
| D5927-17 | Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
| D5930-16 | Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
| D5946-09 | Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements |
| D5947-11 | Standard Test Methods for Physical Dimensions of Solid Plastics Specimens |
| D5948-05(2012) | Standard Specification for Molding Compounds, Thermosetting |
| D5988-12 | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil |
| D5989-14a | Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA) |
| D5991-15 | Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake |
| D5998-16 | Standard Specification for Molded Polyethylene Shipping and Storage Drums |
| D6040-12 | Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| D6041-11 | Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| D6042-09(2016) | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
| D6068-10 | Standard Test Method for Determining J-R Curves of Plastic Materials |
| D6098-16 | Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
| D6099-13 | Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
| D6100-14 | Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM) |
| D6108-13 | Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
| D6109-13 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
| D6110-10 | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics |
| D6111-13a | Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement |
| D6112-13 | Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes |
| D6117-16 | Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes |
| D6150-16 | Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility |
| D6226-15 | Standard Test Method for Open Cell Content of Rigid Cellular Plastics |
| D6247-10 | Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| D6248-98(2012)e1 | Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
| D6261-14 | Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
| D6262-12 | Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
| D6263-15 | Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
| D6265-15 | Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test |
| D6272-17 | Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
| D6287-09 | Standard Practice for Cutting Film and Sheeting Test Specimens |
| D6288-15 | Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing |
| D6289-13 | Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| D6290-13 | Standard Test Method for Color Determination of Plastic Pellets |
| D6338-10 | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods |
| D6339-11 | Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
| D6341-16 | Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C) |
| D6342-12(2017)e1 | Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
| D6358-11 | Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods |
| D6360-15 | Standard Practice for Enclosed Carbon-Arc Exposures of Plastics |
| D6394-14 | Standard Specification for Sulfone Plastics (SP) |
| D6395-11 | Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics |
| D6400-12 | Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities |
| D6436-14 | Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers |
| D6437-05(2016)e1 | Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols) |
| D6456-10 | Standard Specification for Finished Parts Made from Polyimide Resin |
| D6457-08(2013) | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
| D6474-12 | Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
| D6576-13 | Standard Specification for Flexible Cellular Rubber Chemically Blown |
| D6585-11 | Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| D6645-01(2010) | Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
| D6662-17 | Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
| D6691-09 | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum |
| D6712-17 | Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
| D6713-14 | Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
| D6777-16 | Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding |
| D6778-14 | Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
| D6779-17 | Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
| D6783-05(2011) | Standard Specification for Polymer Concrete Pipe |
| D6835-08(2014) | Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
| D6864-11 | Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products |
| D6865-17 | Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
| D6866-16 | Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis |
| D6867-03(2014) | Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
| D6868-17 | Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities |
| D6869-03(2011) | Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) |
| D6953-11 | Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC) |
| D6954-04(2013) | Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation |
| D6979-13 | Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen |
| D6980-12 | Standard Test Method for Determination of Moisture in Plastics by Loss in Weight |
| D6988-13 | Standard Guide for Determination of Thickness of Plastic Film Test Specimens |
| D7026-13 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis |
| D7027-13 | Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine |
| D7029-09 | Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C] |
| D7082-15 | Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe |
| D7083-16 | Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography |
| D7132-14 | Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam |
| D7133-16 | Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids |
| D7134-05(2012) | Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS) |
| D7191-10 | Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor |
| D7192-10 | Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors |
| D7193-11 | Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| D7194-12 | Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) |
| D7210-13 | Standard Practice for Extraction of Additives in Polyolefin Plastics |
| D7211-13 | Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use |
| D7251-11 | Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products |
| D7252-06(2011)e1 | Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates |
| D7253-16 | Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols |
| D7254-15 | Standard Specification for Polypropylene (PP) Siding |
| D7258-17 | Standard Specification for Polymeric Piles |
| D7292-12 | Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) |
| D7293-12 | Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
| D7309-13 | Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry |
| D7310-11 | Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors |
| D7436-12 | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
| D7444-11 | Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics |
| D7445-09 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
| D7471-09(2014) | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
| D7472-09(2014) | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
| D7473-12 | Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations |
| D7474-12 | Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents |
| D7475-11 | Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions |
| D7486-14 | Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis |
| D7487-13e1 | Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test |
| D7568-17 | Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications |
| D7611/D7611M-13e1 | Standard Practice for Coding Plastic Manufactured Articles for Resin Identification |
| D7710-14 | Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials |
| D7711-11(2015) | Standard Guide for Description of Polymer Pellet Defects |
| D7745-11 | Standard Practice for Testing Pultruded Composites |
| D7774-12 | Standard Test Method for Flexural Fatigue Properties of Plastics |
| D7791-12 | Standard Test Method for Uniaxial Fatigue Properties of Plastics |
| D7792/D7792M-15 | Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs |
| D7793-16 | Standard Specification for Insulated Vinyl Siding |
| D7823-16 | Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry |
| D7856-15a | Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space |
| D7990-15 | Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding |
| D7991-15 | Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy Marine Sediment under Controlled Laboratory Conditions |
| D7992/D7992M-15 | Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs |
| D7993-15 | Standard Guide for Analyzing Complex Phthalates |
| D7997-15 | Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations |
| D8019-15 | Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets |
| D8033-16 | Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
| D8036-16 | Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI |
| D8065/D8065M-16 | Standard Classification System and Basis for Specification for Specifying Plastic Films |
| D8069-17a | Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending |
Doporučujeme:
