Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM D7745-11

Standard Practice for Testing Pultruded Composites

Automaticky preložený názov:

Štandardný postup skúšania ťahané Composites

NORMA vydaná dňa 1.9.2011

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 61.20 € Tlačené - 61.20 €
Dostupnosť	SKLADOM
Cena	61.20 € bez DPH
61.20 €

Informácie o norme:

Označenie normy: ASTM D7745-11
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.9.2011
Kód tovaru: NS-39051
Počet strán: 2
Približná hmotnosť: 6 g (0.01 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Ztužené plastické hmoty

Anotácia textu normy ASTM D7745-11 :

Keywords:
ICS Number Code 83.120 (Reinforced plastics)

Doplňujúce informácie

Significance and Use

This practice is intended to aid in the selection of test protocols for reinforced pultruded composites.

This practice is intended to define the locations from which test specimens shall be taken from the reinforced pultruded composite.

1. Scope

1.1 This protocol summarizes the applicable ASTM and other standard test methods commonly used for pultruded composites. The individual performance requirements to these test methods are defined by specific customer specifications.

1.2 This protocol also defines appropriate specimen locations for sampling from the pultruded composites.

1.3 This protocol does not discuss all possible standard test methods that may be utilized for pultruded composites.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1—There is no known ISO equivalent to this guide.

2. Referenced Documents

D149-20	Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D3916-22	Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
D6641/D6641M-23	Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
D7136/D7136M-20	Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
D7332/D7332M-23	Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
G154-23	Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
UL94	Tests for Flammability of Plastic Materials for Parts in Devices and Appliances Available from Underwriters Laboratories (UL), 2600 N.W. Lake Rd., Camas, WA 98607-8542, http://www.ul.com.
D5420-21	Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
D3918-11	Standard Terminology Relating to Reinforced Plastic Pultruded Products (Withdrawn 2020)
D4065-20	Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
D5379/D5379M-19e1	Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method (Includes all amendments and changes 3/24/2021).
D256-23e1	Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (Includes all amendments and changes 4/7/2023).
D495-22	Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
D570-22	Standard Test Method for Water Absorption of Plastics
D635-22	Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D638-22	Standard Test Method for Tensile Properties of Plastics
D695-23	Standard Test Method for Compressive Properties of Rigid Plastics
D696-16	Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C with a Vitreous Silica Dilatometer
D790-17	Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D792-20	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D2344/D2344M-22	Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
D2583-13	Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
D2584-18	Standard Test Method for Ignition Loss of Cured Reinforced Resins
D3039/D3039M-17	Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
D953-19	Standard Test Method for Pin-Bearing Strength of Plastics

Podobné normy:

ASTM D4475-02(2008)..

Historická
1.3.2008

ASTM D4476/D4476M-14..

Historická
1.5.2014

ASTM D5117-09

Historická
1.9.2009

ASTM D5448/D5448M-11..

Historická
15.11.2011

ASTM D5467/D5467M-97..

Historická
1.10.2010

ASTM D5528-13

Historická
1.10.2013

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.