ASTM D4066-13
ASTM D4094-07
ASTM D4101-14
ASTM D4203-12
ASTM D4216-13
ASTM D4218-96(2008)..
Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM D5204-13
Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
Automaticky preložený názov:
Štandardný systém klasifikácie polyamid-imidové (PAI), tvárnenie
NORMA vydaná dňa 1.9.2013
Informácie o norme:
Označenie normy: ASTM D5204-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.9.2013
Kód tovaru: NS-30270
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM D5204-13 :
Keywords:
extrusion material, line call-out, molding material, polyamide-imide, ICS Number Code 83.080.20 (Thermoplastic materials)
Doplňujúce informácie
| 1. Scope | ||||||||||||||||||||||||||||||||||||
|
1.1 This classification system covers polyamide-imide materials suitable for injection molding and extrusion. 1.2 The properties included in this classification system are those required to identify the compositions covered. It is possible that other requirements are necessary to identify particular characteristics important to specialized applications. The use of suffixes as shown in Section 1.3 This standard allows for the use of recycled materials provided that specification requirements based upon this classification system are met. 1.4 This classification system and subsequent line call-out (specification) is intended to be a means of calling out plastics materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection needs to be made by those having expertise in the plastics field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the inherent properties of the material other than those covered by this classification, and the economics. 1.5 The values stated in SI units are to be regarded as the standard. (Reporting in inch-pound units is acceptable.) 1.6 The following precautionary caveat pertains only to the test methods portion, Section 11, of this classification system: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
|
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
|
|
Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
|
|
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
|
|
Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
|
|
Standard Practice for Packaging/Packing of Plastics
|
|
Standard Classification System for Specifying Plastic Materials
|
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
IEEE/ASTM SI-10
|
Standard for Use of the International System of Units (SI): The Modern Metric System
|
MIL-P-46179A
|
Plastic Molding and Extrusion Materials, Polyamide-Imide (PAI)
|
|
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (Includes all amendments and changes 4/7/2023).
|
|
Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
|
|
Standard Test Methods for DC Resistance or Conductance of Insulating Materials (Includes all amendments and changes 5/6/2021).
|
|
Standard Practice for Conditioning Plastics for Testing
|
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
|
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
|
|
Standard Terminology Relating to Plastics
|
|
Standard Test Method for Vicat Softening Temperature of Plastics (Includes all amendments and changes 9/15/2017).
|
|
Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) |
Podobné normy:
Historická
1.7.2013
Historická
1.11.2007
Historická
1.3.2014
Historická
15.11.2012
Historická
1.11.2013
Historická
1.11.2008
Odporúčame:
Aktualizácia technických noriem
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
