Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM D7793-16

Standard Specification for Insulated Vinyl Siding

NORMA vydaná dňa 1.11.2016

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 81.30 € Tlačené - 81.30 €
Dostupnosť	SKLADOM
Cena	81.30 € bez DPH
81.30 €

Informácie o norme:

Označenie normy: ASTM D7793-16
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2016
Kód tovaru: NS-667164
Počet strán: 12
Približná hmotnosť: 36 g (0.08 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Pryžové a plastové izolační materiály
Termoplasty

Anotácia textu normy ASTM D7793-16 :

Keywords:

insulated siding, insulated vinyl siding, plastic building products, plastic weatherability, recycled plastic, rigid PVC siding, specification, vinyl siding,, ICS Number Code 29.035.20 (Plastic and rubber insulating materials), 83.080.20 (Thermoplastic materials)

Doplňujúce informácie

1. Scope

1.1 This specification establishes requirements for insulated vinyl siding, which is vinyl siding with integral foam plastic insulating material, where the vinyl siding is manufactured from rigid PVC compound. Compliance with this standard requires insulated vinyl siding to demonstrate a thermal insulation value of R-2.0 or greater. Other performance requirements and test methods addressed by this standard include materials properties and dimensions, warp, shrinkage, impact strength, expansion, appearance, thermal distortion resistance, and windload resistance. Methods of indicating compliance with this specification are also provided.

Note 1: Insulated vinyl siding is composed of two major components: the vinyl siding and the insulating material. It is intended that the vinyl siding portion comply with Specification D3679. Applicable portions of Specification D3679 are included in this specification. Additional requirements that pertain only to the insulation as a separate material, or to the combination of vinyl siding and insulation as a whole, are also included. For further explanation, see Appendix X1.

1.2 Insulated vinyl siding shall be tested with the insulation material in place or removed, as specified in the applicable requirement or test method.

1.3 The use of PVC recycled plastic in this product shall be in accordance with the requirements in Section ‎4.

1.4 Insulated vinyl siding produced to this specification shall be installed in accordance with Practice D4756. Reference shall also be made to the manufacturer's installation instructions for the specific product to be installed.

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 2: There is no known ISO equivalent to this standard.

2. Referenced Documents

D3679-21	Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
D3892-15(2020)	Standard Practice for Packaging/Packing of Plastics
D4226-19e1	Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products (Includes all amendments and changes 8/21/2020).
D4756-15	Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
D5206-19	Standard Test Method for Windload Resistance of Rigid Plastic Siding
D5947-18	Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
D7209-06	Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015)
D7445-18	Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
D1183-03(2019)	Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
D1435-20	Standard Practice for Outdoor Weathering of Plastics
D2244-23	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
D2457-21	Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
D696-16	Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C with a Vitreous Silica Dilatometer
D1042-22	Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
C591-22	Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C1199-22	Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C297/C297M-16	Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
C578-23	Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C1289-23a	Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board (Includes all amendments and changes 10/3/2023).
C1363-19	Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
D618-21	Standard Practice for Conditioning Plastics for Testing
D635-22	Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
G147-17	Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
AC05	Acceptance Criteria for Sandwich Panel Adhesives
ISO/IECGuide 65
E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
16 CFR Part 460	Labeling and Advertising of Home Insulation
E1753-22	Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films

Odporúčame:

Aktualizácia zákonov

Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.