Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
Automaticky preložený názov:
Štandard Specification pre štrukturálne zatepleného panelového (SIP) lepidla na laminovanie Oriented Strand Board (OSB) do tuhého, z buniek Polystryene tepelnoizolačných základných materiálov
NORMA vydaná dňa 1.9.2009
Označenie normy: ASTM D7446-09
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.9.2009
Kód tovaru: NS-38472
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
building component, construction materials, engineered wood, lamination, structural insulated panel, ICS Number Code 83.180 (Adhesives)
Significance and Use | ||||||||||||||||||||||||||||
This specification addresses minimum performance criteria for adhesives used to laminate oriented strand board (OSB) structural panel facing material to expanded or extruded polystyrene core materials. Adhesive performance is based on tests that simulate exposure to moisture, temperature, seasonal weathering, and creep. Additionally, the adhesive is to demonstrate resistance to oxidation, mold, chemical reagents, and compatibility to the specific laminating materials. The adhesive manufacturers can use this specification for new product development and quality control purposes. Structural insulated panel manufacturers rely on an adhesive performance specification that determines its suitability before use. Performance of the SIP adhesive when evaluated in accordance with this specification aids in determining the suitability of the adhesive for laminating OSB facings to rigid cellular polystyrene core materials in the manufacture of structural insulated panels. |
||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||
1.1 This specification is designed to evaluate adhesives suitable for the bonding of oriented strand board (OSB) to rigid cellular polystyrene insulation core materials for general structure use. 1.2 The requirements of the structural insulated panel (SIP) adhesive are based on the performance of the adhesive as measured by: 1.2.1 Resistance to shear by compression loading in ambient conditions and after accelerated aging. 1.2.2 Resistance to tensile loading in ambient conditions and after accelerated aging. 1.2.3 Resistance to creep (deformation) under static load in ambient conditions and after accelerated aging. 1.2.4 Tensile and shear strength to polystyrene core materials. 1.3 The classification of the adhesive formulation is based on, but not limited to the adhesive’s industry accepted generic names, for example: phenol-resorcinol, emulsion polymer isocyanate, one and two-part urethane. The type of adhesive application and curing terminology are also usually included for classification purposes such as cold-setting phenol resorcinol, heat-cured phenol resorcinol, and hot melt one component urethane. 1.4 Evaluation of adhesive performance at high temperature conditions, such as during a fire exposure, is beyond the scope of this specification. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||
|
Historická
1.10.2013
Historická
1.4.2011
Historická
1.5.2012
Historická
1.10.2012
Historická
1.11.2010
Historická
1.12.2011
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.