Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
Automaticky preložený názov:
Štandardná skúšobná metóda pre pevnosť v ohybe lepeného Vrstvené zhromaždenia
NORMA vydaná dňa 1.5.2012
Označenie normy: ASTM D1184-98(2012)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.5.2012
Kód tovaru: NS-16561
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
adhesive bonded assemblies, flexural strength, laminates , Adhesive bonds, Adhesive joints, Adhesives, Bond strength--adhesives, Bond strength--laminated materials/applications, Flexural testing, Laminates (adhesive applications), Loading tests--adhesives, Stress--tapes, ICS Number Code 83.180 (Adhesives)
Significance and Use | ||||
This test method is designed for both wood and metal bonded specimens. The test method provides a means to compare flexural properties between assemblies. The data are reduced to a comparable basis by means of the formulas given in 11.1 and 11.2. It is recognized that these formulas do not apply rigidly to tests made in the manner described in this method, but serve only to reduce the data to a comparable basis. |
||||
1. Scope | ||||
1.1 This test method covers the determination of the comparative properties of either metal or wood adhesive bonded assemblies when subjected to flexural stresses with standard shape specimens and under defined conditions of pretreatment, temperature, relative humidity, and testing technique. The test specimen and testing technique were designed to develop a large portion of shear forces between the laminae of the test piece when the load is applied, rather than to reduce shear stress to a minimum as is done in other ASTM test methods for flexural properties. This method is not applicable to assemblies made with nonrigid adherends. The data obtained are not suitable for design work. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information purposes. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Historická
1.3.2014
Historická
1.4.2010
Historická
1.6.2009
Historická
1.10.2012
Historická
1.5.2013
Historická
1.3.2014
Posledná aktualizácia: 2024-11-29 (Počet položiek: 2 209 787)
© Copyright 2024 NORMSERVIS s.r.o.