Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
Automaticky preložený názov:
Štandardné špecifikácie pre nesintrovaného pigmentovaná polytetrafluóretylénu (PTFE) extrudované fólie alebo pásky
NORMA vydaná dňa 1.2.2011
Označenie normy: ASTM D7193-11
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2011
Kód tovaru: NS-37823
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
apparent density, elongation, extruded, film, fluorocarbon film, pigmented, PTFE, PTFE tape, tape, tensile, thread seal tape, unsintered, Apparent density, Fluorocarbon film, PTFE (polytetrafluoroethylene)--specifications, Unsintered PTFE (polytetrafluoroethylene), ICS Number Code 83.140.10 (Films and sheets)
1. Scope | ||||||||||||||||||||||||||||||
1.1 This specification covers unsintered, pigmented, extruded films or tapes manufactured from polytetrafluoroethylene, in nominal thicknesses from 0.025 mm (0.001 in.) to 0.51 mm (0.020 in.), which are >97 % virgin PTFE in composition prior to introducing pigments. Note 1—For unsintered non-pigmented products refer to Specification D6585. 1.1.1 The use of recycled PTFE for production of unsintered extruded films or tapes has not been identified at this time. When commercial usable processes and materials are available, this specification will be revised to include recycled materials. 1.2 The values stated in SI units are detailed in are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 2—Although this specification and ISO/DIS 13000-1 (1997) and ISO/DIS 13000-2 (1997) differ in approach or detail, data obtained relating to specific properties, using either are technically equivalent. Note 3—This specification is intended to be a complement to Specification D6585, as the materials covered herein vary significantly enough due to their additives to warrant a stand-alone set of requirements. |
||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||
|
Historická
1.2.2011
Historická
15.4.2009
Historická
1.4.2011
Historická
1.4.2013
Historická
1.4.2010
Historická
1.12.2011
Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !
Chcete vedieť viac informácii ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-01 (Počet položiek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.