Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
Automaticky preložený názov:
Štandardné Guide pre vadu odhaľovanie a Hodnotenie plastových fólií pomocou optických senzorov
NORMA vydaná dňa 1.12.2011
Označenie normy: ASTM D7310-11
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.12.2011
Kód tovaru: NS-38133
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
cast film, defect, extrusion, optical scanner, tubular film, Defects--plastics, Optical detection method, Plastic film, ICS Number Code 83.140.10 (Films and sheets)
Significance and Use | ||
Defects in film are not acceptable to the end-user as there is a reduction in the fitness-for-use in many applications. This document is intended to be a guide to assist users in the inspection and observation of defects. This guide is applicable in a laboratory environment as a quality control or as a research tool. It is also appropriate for use in any commercial process used to produce film including calendering and solvent casting. This guide is also suitable for use as an evaluation or screening tool for materials intended to be used in other processes where defects of this nature are also critical, such as fiber spinning and non-wovens. The individual user must establish the relationship between the criteria and acceptance for fitness-for-use and the observed defects, as it varies by polymer and application. This is attained by the collection of data over a time-period to establish acceptable control limits. |
||
1. Scope | ||
1.1 This guide is intended to provide suggested approaches and criteria for the observation and reporting of defects in various types of plastic film, by means of an optical scanning system. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1—There is no known ISO equivalent to this standard. |
||
2. Referenced Documents | ||
|
Historická
15.8.2013
Historická
1.8.2011
Historická
1.8.2012
Historická
1.5.2011
Historická
1.3.2014
Historická
1.11.2008
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.