Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
Automaticky preložený názov:
Štandardná skúšobná metóda pre nízky tlak vzduchu Test kameninovými potrubie
NORMA vydaná dňa 1.9.2006
Označenie normy: ASTM C828-11
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.9.2006
Kód tovaru: NS-15206
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
air test, clay pipe, pipe, pressure test, sewers, testing, test section, vitrified clay pipe, Acceptance criteria/testing--clay pipe/fittings, Air pressure testing--building constructions/materials, Clay pipe/piping systems, Field testing, Low-pressure air test, Pressure testing--pipes, Vitrified clay pipe/fittings, ICS Number Code 23.040.01 (Pipeline components in general. Pipelines)
1. Scope | ||||||
1.1 This test method defines procedures for testing vitrified clay pipe lines, using low-pressure air, to demonstrate the integrity of the installed line. Refer to Practice C 12. 1.2 This test method shall be performed on lines after connection laterals, if any, have been plugged and braced adequately to withstand the test pressure, and after the trenches have been backfilled for a sufficient time to generate a significant portion of the ultimate trench load on the pipe line. The time between completion of the backfill operation and low-pressure air testing shall be determined by the approving authority. 1.3 This test method may also be used as a preliminary test, which enables the installer to demonstrate the condition of the line prior to backfill and further construction activities. 1.4 This test method is suitable for testing gravity-flow sewer pipe constructed of vitrified clay or combinations of clay and other pipe materials. 1.5 Terminology C 896 is to be used for clarification of terminology in this test method. 1.6 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.3.2010
Historická
1.5.2012
Historická
1.7.2012
Historická
1.7.2012
Historická
1.7.2012
Historická
1.8.2010
Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !
Chcete vedieť viac informácii ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.