Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM Volume 08.02 - Plastics (II): D3222 - D5083
PUBLIKÁCIE vydaná dňa 1.6.2018
Dostupnosť | Vypredané |
Cena | NA OTÁZKU bez DPH |
NA OTÁZKU |
Označenie: ASTM Volume 08.02 - Plastics (II): D3222 - D5083
Počet strán: 916
Približná hmotnosť: 2779 g (6.13 libier)
Dátum vydania: 1.6.2018
Krajina: Americká publikácia
These three volumes, 08.01 through 08.03, feature over 480 plastics-related standards, including test methods that establish standard procedures for assessing physical, mechanical, optical, permanence, and thermal properties.Volume 08.03 also covers:
Plastic Building Products—standards deal with plastic siding products, glass-fiber-reinforced polyester plastic panels, and PVC building products.
Reinforced Plastic Piping Systems and Chemical Equipment—covers testing requirements for glass-fiber-reinforced thermosetting resin pipes, fittings, and joints; and establish chemical resistance of thermosetting resins.
D3222-05(2015) | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
D3275-08(2013) | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
D3291-11(2016)e1 | Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression |
D3294-15 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
D3295-15 | Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing |
D3296-14a(2019) | Standard Specification for FEP-Fluorocarbon Tube |
D3307-16 | Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
D3308-12(2017) | Standard Specification for PTFE Resin Skived Tape |
D3350-14 | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
D3354-15 | Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
D3364-99(2011) | Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications |
D3367-13 | Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force |
D3368-17 | Standard Specification for FEP Sheet and Film |
D3418-15 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
D3419-12(2019) | Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds |
D3420-14 | Standard Test Method for Pendulum Impact Resistance of Plastic Film |
D3453-12 | Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications |
D3465-14 | Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
D3489-17 | Standard Test Methods for Microcellular Urethane Materials |
D3574-17 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
D3575-14 | Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers |
D3576-15 | Standard Test Method for Cell Size of Rigid Cellular Plastics |
D3591-17 | Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds |
D3594-93(2013) | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
D3595-14(2019)e1 | Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film |
D3596-14 | Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins |
D3641-15 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
D3647-16 | Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition |
D3675-17 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
D3676-13 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay |
D3748-14(2019) | Standard Practice for Evaluating High-Density Rigid Cellular Plastics |
D3749-13 | Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique |
D3763-15 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
D3768-16 | Standard Test Method for Microcellular Urethanes—Flexural Recovery |
D3769-15 | Standard Test Method for Microcellular Urethanes—High-Temperature Sag |
D3795-00a(2012) | Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
D3801-10 | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
D3826-98(2013) | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
D3835-16 | Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer |
D3846-08(2015) | Standard Test Method for In-Plane Shear Strength of Reinforced Plastics |
D3851-17 | Standard Specification for Microcellular Polyurethane Shoe Soling Materials |
D3892-15 | Standard Practice for Packaging/Packing of Plastics |
D3895-14 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
D3914-02(2016) | Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod |
D3916-08(2016) | Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod |
D3917-15a | Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes |
D3918-11 | Standard Terminology Relating to Reinforced Plastic Pultruded Products |
D3935-15 | Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
D3965-16 | Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
D3981-09a(2016) | Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
D4000-16 | Standard Classification System for Specifying Plastic Materials |
D4001-13 | Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering |
D4020-11 | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials |
D4065-12 | Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
D4066-13 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
D4067-16 | Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
D4092-07(2013) | Standard Terminology for Plastics: Dynamic Mechanical Properties |
D4093-95(2014) | Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials |
D4101-17e1 | Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
D4203-17 | Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
D4204-16 | Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study |
D4216-17 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds |
D4218-15 | Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique |
D4272/D4272M-15 | Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop |
D4273-11 | Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols |
D4274-16 | Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols |
D4275-17 | Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography |
D4321-15 | Standard Test Method for Package Yield of Plastic Film |
D4329-13 | Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics |
D4349-16 | Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials |
D4350-16 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
D4364-13 | Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight |
D4385-13 | Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products |
D4396-15 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications |
D4397-16 | Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
D4440-15 | Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology |
D4441-15 | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
D4443-13 | Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography |
D4459-12 | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications |
D4473-08(2016) | Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior |
D4475-02(2016) | Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method |
D4476/D4476M-14 | Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
D4526-12 | Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography |
D4549-15 | Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
D4591-17 | Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
D4603-03(2011)e1 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
D4634-16 | Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
D4635-16 | Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications |
D4659-14 | Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates |
D4660-18 | Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate |
D4661-13 | Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates |
D4662-15 | Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols |
D4663-15 | Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates |
D4669-18 | Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols |
D4670-17 | Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols |
D4671-16 | Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols |
D4672-18 | Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols |
D4673-16 | Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
D4674-02a(2010) | Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
D4703-16 | Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets |
D4745-14 | Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods |
D4754-11 | Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell |
D4801-08(2016) | Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater |
D4802-16 | Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
D4804-14 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
D4812-11 | Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics |
D4819-13 | Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics |
D4875-11 | Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols |
D4877-14 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
D4878-15 | Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols |
D4889-15 | Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates |
D4890-13 | Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols |
D4894-15 | Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
D4895-16 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
D4968-17 | Standard Practice for Annual Review of Test Methods and Specifications for Plastics |
D4969-17 | Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
D4976-12a | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
D4986-10 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
D5017-17 | Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
D5023-15 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) |
D5024-15 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression |
D5025-12e1 | Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials |
D5026-15 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension |
D5028-17 | Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis |
D5045-14 | Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
D5047-17 | Standard Specification for Polyethylene Terephthalate Film and Sheeting |
D5048-14 | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame |
D5071-06(2013) | Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus |
D5083-17 | Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-05-03 (Počet položiek: 2 896 946)
© Copyright 2024 NORMSERVIS s.r.o.