ASTM D4741-13
ASTM D4742-08e1
ASTM D4857-12
ASTM D4858-13
ASTM D4859-13
ASTM D4863-13
Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM D6987/D6987M-13a
Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022) (Includes all amendments And changes 1/13/2022).
Automaticky preložený názov:
Štandardná skúšobná metóda na vyhodnotenie Oleje dieselový motor v T-10 recirkulácie výfukových plynov vznetového motora,
NORMA vydaná dňa 1.10.2013
Informácie o norme:
Označenie normy: ASTM D6987/D6987M-13a
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2013
Kód tovaru: NS-37224
Počet strán: 38
Približná hmotnosť: 114 g (0.25 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM D6987/D6987M-13a :
Keywords:
cylinder liner wear, diesel engine oil, exhaust gas recirculation, lead, lubricants, oil consumption, oxidation, soot, top ring weight loss, T-10 Diesel Engine, ICS Number Code 75.100 (Lubricants, industrial oils and related products)
Doplňujúce informácie
| Significance and Use | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
5.1 This test method was developed to evaluate the wear performance of engine oils in turbocharged and intercooled four-cycle diesel engines equipped with EGR. Obtain results from used oil analysis and component measurements before and after the test. 5.2 The test method may be used for engine oil specification acceptance when all details of the procedure are followed. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This test method is commonly referred to as the Mack T-10.2 This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics, including lead corrosion and wear of piston rings and cylinder liners. 1.2 This test method also provides the procedure for running an abbreviated length test, which is commonly referred to as the T-10A. The procedures for the T-10 and T-10A are identical with the exception of the items specifically listed in 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Test Method for Water and
Sediment in Middle Distillate Fuels by Centrifuge Terminology Relating to Thermometry and
Hydrometry Standard Test Method for Multielement
Determination of Used and Unused Lubricating Oils and Base Oils by
Inductively Coupled Plasma Atomic Emission Spectrometry
(ICP-AES) Test Method for Evaluation of Automotive
Engine Oils for Inhibition of Deposit Formation and Wear in a
Spark-Ignition Internal Combustion Engine Fueled with Gasoline and
Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn
2003) Standard Test Method for Evaluating
Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder
Lubricity Evaluator (SLBOCLE) Standard Test Method for Evaluation of
Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009) Standard Test Method for Evaluation of
Engine Oils in a High Speed, Single-Cylinder Diesel
Engine—Caterpillar 1P Test Procedure Standard Practice for Using Significant
Digits in Test Data to Determine Conformance with
Specifications Standard Practice for Dealing With
Outlying Observations Standard Test Method for Cloud Point of
Petroleum Products and Liquid Fuels Standard Test Method for Corrosiveness to
Copper from Petroleum Products by Copper Strip Test Standard Test Method for API Gravity of
Crude Petroleum and Petroleum Products (Hydrometer/Method) Standard Test Method for Acid Number of
Petroleum Products by Potentiometric Titration (Includes all
amendments and changes 1/4/2019). Standard Test Method for Calculated
Cetane Index of Distillate Fuels (Includes all amendments and
changes 2/23/2023). Standard Test Method for Cetane Number of
Diesel Fuel Oil Standard Test Method for Hydrocarbon
Types in Liquid Petroleum Products by Fluorescent Indicator
Adsorption (Includes all amendments and changes 9/14/2020). Standard Test Method for Oxidation
Stability of Distillate Fuel Oil (Accelerated Method) Standard Test Method for Sulfur in
Petroleum Products by Wavelength Dispersive X-ray Fluorescence
Spectrometry Standard Test Method for Estimation of
Net Heat of Combustion of Aviation Fuels Standard Specification for Performance of
Active API Service Category Engine Oils (Includes all amendments
and changes 12/8/2022). Standard Test Method for Distillation of
Petroleum Products and Liquid Fuels at Atmospheric Pressure
(Includes all amendments and changes 2/9/2024). Standard Test Methods for Flash Point by
Pensky-Martens Closed Cup Tester Standard Test Method for Base Number
Determination by Potentiometric Hydrochloric Acid Titration Standard Test Method for Determination of
the Aromatic Content and Polynuclear Aromatic Content of Diesel
Fuels By Supercritical Fluid Chromatography Standard Test Method for Evaluation of
Automotive Engine Oils for Inhibition of Rusting (Sequence IID)
(Withdrawn 2003) Standard Test Method for Pour Point of
Petroleum Products (Includes all amendments and changes
11/29/2022). Standard Test Method for Sulfur in
Petroleum Products (General High Pressure Decomposition Device
Method) (Withdrawn 2023) Standard Specification for Mineral
Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) Standard Test Method for Kinematic
Viscosity of Transparent and Opaque Liquids (and Calculation of
Dynamic Viscosity) Standard Test Method for Ash from
Petroleum Products Standard Test Method for Ramsbottom
Carbon Residue of Petroleum Products Standard Test Method for Evaluation of
Diesel Engine Oils in T-8 Diesel Engine Standard Test Method for Density,
Relative Density, and API Gravity of Liquids by Digital Density
Meter |
Podobné normy:
Historická
1.10.2013
Historická
15.10.2008
Historická
1.11.2012
Historická
15.6.2013
Historická
15.6.2013
Historická
15.6.2013
Odporúčame:
Aktualizácia technických noriem
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
