Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
Automaticky preložený názov:
Štandardná skúšobná metóda pre určenie výšky emisií prchavých organických zlúčenín (VOC), prepustený z rozpúšťadlové automobilovom priemysle a sú k dispozícii na odstránenie v zariadení VOC Control (zmierňovanie)
NORMA vydaná dňa 1.7.2014
Označenie normy: ASTM D5087-02(2014)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.7.2014
Kód tovaru: NS-29785
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
automotive coatings, solvent release, VOC abatement, ICS Number Code 87.040 (Paints and varnishes)
Significance and Use | ||||||||||||
4.1 This test method provides basic engineering data that may be used to determine the amount of VOC available for delivery at the inlet of a VOC control device (particularly for the automobile industry).6 Typically, the procedure is useful for establishing the quantity of VOC that is evolved from the coating in the baking oven and available to be incinerated, although the same procedure can be followed for other forms of VOC abatement (that is, carbon, adsorption, etc.). 4.2 This test method may be adaptable for use directly in a production environment if all the critical factors (for example, temperature, cleanliness, vibration, accessibility, etc.) can be adequately controlled. 4.3 The total amount of VOC removed from the process by the VOC control device is a function of the amount available as given by this test method combined with the VOC removal efficiency of the control device. |
||||||||||||
1. Scope | ||||||||||||
1.1 This test method covers the determination of the amount of volatile organic compound (VOC) released from applied solventborne automotive coatings that is available for delivery to a VOC control device. This is accomplished by measuring the weight loss of a freshly coated test panel subjected to solvent evaporation or baking in a laboratory simulation of the production process. 1.2 This test method is applicable to the VOC released from flashoff and baking operations after the paint has been applied. 1.3 This test method is applicable to solventborne automotive coating materials and is intended to represent or simulate the production process. The same general principles apply to waterborne coatings that contain volatile organic compounds (VOC), although specific procedural details are not presented herein to differentiate between VOC and water. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historická
1.2.2008
Historická
1.6.2009
Historická
1.7.2013
Historická
15.4.2011
Historická
15.5.2010
Historická
1.7.2012
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.