Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
Automaticky preložený názov:
Štandardné skúšobné metódy pre energeticky nezávislé Obsah Tepelný a Liquid Tlačiarenské farby Systems
NORMA vydaná dňa 1.11.2012
Označenie normy: ASTM D4713-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2012
Kód tovaru: NS-28271
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
heatset-type printing inks, liquid printing ink, nonvolatile matter content, ovens, printing inks, resin solutions, solvents, vehicles, ICS Number Code 87.080 (Inks. Printing inks)
Significance and Use | ||||||||||
4.1 Nonvolatile content of printing inks is useful for specification acceptance between the producer and the user. 4.2 In order to obtain accurate results for heatset systems within the specified 3-h heating time, the specimen film thickness must be less than 100 g/m2, and the oven must have forced ventilation. Thickness of the specimen film is less critical for liquid ink systems. |
||||||||||
1. Scope | ||||||||||
1.1 These test methods cover the determination of weight content of nonvolatile matter in two types of printing inks. 1.2 Test Method A is applicable to heatset-type printing inks and resin solutions; solvents in such systems typically have initial boiling points in the range from 240 to 275°C (470 to 535°F) and vapor pressures less than 0.2 mm Hg. 1.3 Test Method B is applicable to liquid-type printing inks and vehicles based on aqueous or organic solvents that evaporate readily at ordinary room temperatures. 1.4 The values stated in SI units
are to be regarded as the standard. The values given in parentheses
are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
15.7.2010
Historická
1.6.2013
Historická
1.12.2010
Historická
1.6.2011
Historická
1.6.2012
Historická
1.6.2013
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.