Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
Automaticky preložený názov:
Štandardná skúšobná metóda pre Gél doby Carbon Fiber-epoxidové předimpregnovaného laminátu
NORMA vydaná dňa 1.5.2012
Označenie normy: ASTM D3532/D3532M-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.5.2012
Kód tovaru: NS-23980
Počet strán: 2
Približná hmotnosť: 6 g (0.01 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
carbon fiber-epoxy prepreg, gel time, ICS Number Code 83.120 (Reinforced plastics)
Significance and Use |
This test method can be used to obtain the gel time of resin squeezed from prepreg tape or sheet material. This test is a useful measure for material acceptance. The gel time will vary with the test temperature. The temperatures specified in this test method are two of many temperatures often used in processing epoxy prepreg material. If other test temperatures are used, this is to be clearly noted as indicated in 9.1.2. Gel time is not recommended as a measure of outline (unacceptable degree of cross-linking). Use Resin Flow Test Method D3532, or Dynamic Viscosity Practice D4473. |
1. Scope |
1.1 This test method covers the determination of gel time of carbon fiber-epoxy tape and sheet. The test method is suitable for the measurement of gel time of resin systems having either high or low viscosity. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Within the text, inch-pound units are shown in brackets. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Historická
1.3.2014
Historická
1.2.2011
Historická
15.11.2013
Historická
1.9.2007
Historická
1.3.2008
Historická
1.5.2014
Posledná aktualizácia: 2024-11-22 (Počet položiek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.