Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM B86-13

Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

Automaticky preložený názov:

Štandard Specification pre zinok a zinku a hliníka (ZA) Alloy Foundry a odliatky

NORMA vydaná dňa 1.2.2013

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 70.40 € Tlačené - 70.40 €
Dostupnosť	SKLADOM
Cena	70.40 € bez DPH
70.40 €

Informácie o norme:

Označenie normy: ASTM B86-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2013
Kód tovaru: NS-8469
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Výrobky z olova, zinku a cínu

Anotácia textu normy ASTM B86-13 :

Keywords:
bar stock, castings, concast, continuous cast bar stock, die castings, foundry castings, permanent mold castings, pressure die castings, prototyping, sand castings, ZA alloys, Zamak, zinc, zinc-aluminum alloys, zinc metal, ICS Number Code 77.150.60 (Lead, zinc and tin products)

Doplňujúce informácie

1. Scope

1.1 This specification covers commercial zinc, zinc-aluminum castings and continuous cast bar stock, as designated and specified in Table 1. Seven alloy compositions are specified and designated as follows:

Common

Traditional

ASTM ^A

UNS

Alloy 3

Zamak 3

AG 40A ^B

Z33525

Alloy 7

Zamak 7

AG 40B

Z33527

Alloy 5

Zamak 5

AC 41A ^B

Z35533

Alloy 2

Zamak 2

AC 43A

Z35545

ZA-8

...

Z35638

ZA-12

...

Z35633

ZA-27

...

Z35841

Element

Alloy 3^A^,^B^,^C^,^D
Zamak 3
(AG40A)

Alloy 7^A ^,^B^,^C^,^D^,^E
Zamak 7
(AG40B)

Alloy 5^A^,^B^,^C^,^D
Zamak 5
(AC41A)

Alloy 2^A^,^C^,^,^D
Zamak 2
(AC43A)

ZA-8^A^,^C^,^F
ZA-8

ZA-12^A^,^C ^,^F
ZA-12

ZA-27^A^,^C^,^F
ZA-27

(Z33525)

(Z33527)

(Z35533)

(Z35545)

(Z35638)

(Z35633)

(Z35841)

Aluminum

3.7-4.3

8.0-8.8

10.5-11.5

25.0-28.0

Magnesium

0.02-0.06^G

0.005-0.020

0.02-0.06^G

0.02-0.06

0.01-0.03

0.01-0.02

Copper

0.1 max^H

0.1 max^E

0.7-1.2

2.6-3.3

0.8-1.3

0.5-1.2

2.0-2.5

Iron, max

0.05

0.075

Lead, max

0.005

0.003

0.005

0.006

Cadmium, max

0.004

0.002

0.004

0.006

Tin, max

0.002

0.001

0.002

0.003

Nickel

. . .

0.005-0.020

. . .

Zinc^I

remainder

1.2 Zinc Alloys Z33525, Z33527, Z35533, and Z35545 are used primarily in the manufacture of pressure die castings. Zinc-Aluminum Alloys Z35638, Z35633, and Z35841 are used in the manufacture of both foundry and pressure die castings. These alloys are also fabricated into continuous cast bar stock used for prototyping and screw machine stock.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 Systems of nomenclature used to designate zinc and zinc-aluminum (ZA) alloys used for casting are described in 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

B899-21	Standard Terminology Relating to Non-ferrous Metals and Alloys
B949-23	Standard Specification for General Requirements for Zinc and Zinc Alloy Products
E88-11(2017)	Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
E536-23	Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
B557-15(2023)	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
MIL-STD-129	Marking for Shipment and Storage (Military Agencies)
MIL-P-116	Methods of Preservation
E634-23	Standard Practice for Sampling Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry
Fed. Std. No. 123	Marking for Shipment (Civil Agencies)
B240-22	Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B275-14	Standard Practice for Codification of Certain Zinc, Tin and Lead Die Castings (Withdrawn 2020)
E8-04	Standard Test Methods for Tension Testing of Metallic Materials
E23-23a	Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Includes all amendments and changes 4/13/2023).
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

Podobné normy:

ASTM B749-03(2009)..

Historická
1.10.2009

ASTM B792-13

Historická
1.2.2013

ASTM B927/B927M-13..

Historická
1.10.2013

ASTM B949-13

Historická
1.8.2013

ASTM B952/B952M-13..

Historická
1.2.2013

ASTM E310-10

Historická
1.1.2010

Odporúčame:

EviZak - všetky zákony vrátane ich evidencie na jednom mieste

Poskytovanie aktuálnych informácií o legislatívnych predpisoch vyhlásených v Zbierke zákonov od roku 1945.
Aktualizácia 2x v mesiaci !

Chcete vedieť viac informácii ? Pozrite sa na túto stránku.