Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM B792-13
Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
Automaticky preložený názov:
Štandardné špecifikácie pre zliatiny zinku v ingot Formulár pre rozmočeným snehom Casting
NORMA vydaná dňa 1.2.2013
Informácie o norme:
Označenie normy: ASTM B792-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.2.2013
Kód tovaru: NS-8140
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Anotácia textu normy ASTM B792-13 :
Keywords:
casting, casting alloys, gravity casting, permanent mold casting, slush casting, zinc, zinc alloys, ICS Number Code 77.150.60 (Lead, zinc and tin products)
Doplňujúce informácie
| 1. Scope | ||
|
1.1 This specification covers commercial zinc alloys in ingot form for remelting for the manufacture of castings from the alloys as specified and designated as shown in
|
Composition, % |
|
|
UNS Z34510 |
UNS Z30500 |
|
|
Color CodeC |
Black/Red |
Black/Orange |
|
Element |
|
|
|
Copper |
0.2–0.3 |
0.1 max |
|
Aluminum |
4.50–5.00 |
5.25–5.75 |
|
Lead |
0.007 max |
0.007 max |
|
Cadmium |
0.005 max |
0.005 max |
|
Tin |
0.005 max |
0.005 max |
|
Iron |
0.100 max |
0.100 max |
|
Magnesium |
0.010 max |
0.010 max |
|
Zinc |
Remainder |
Remainder |
1.2 Slush casting alloys are used
primarily for the manufacture of hollow castings such as lighting
fixtures, lamp bases, and small statues.
1.3 This specification covers two zinc alloys which are specified and designated as follows:
|
UNS |
ASTM |
|
Z34510 |
Slush Casting Alloy A |
|
Z30500 |
Slush Casting Alloy B |
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
|
ISO 3815-2 |
|
|
ISO 3815-1 |
Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry |
|
Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
|
|
Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
|
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
|
Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition |
|
|
Standard Terminology Relating to Non-ferrous Metals and Alloys |
|
|
Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot |
Doporučujeme:
