Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
Automaticky preložený názov:
Štandard Specification pre Oceľové výkovky, Microalloy, pre priemyselné použitie
NORMA vydaná dňa 1.4.2011
Označenie normy: ASTM A909/A909M-06(2011)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2011
Kód tovaru: NS-4766
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
forging procedure, microalloyed, steel forgings, Carbon steel forgings--specifications, Industrial metals/alloys--specifications, Microalloy steel--specifications, Steel forgings--specifications, Wrought steel forgings, ICS Number Code 77.140.85 (Iron and steel forgings)
1. Scope | ||||||||||||||||||||
1.1 This specification covers wrought, microalloyed carbon steel forgings for industrial use. Microalloyed steels develop their properties by the addition of small amounts of microalloying elements such as vanadium, columbium, titanium, or molybdenum. The properties may be influenced also by control of the hot working process and temperature and by control of the subsequent cooling rate. 1.2 The forgings shall be furnished to chemical composition and mechanical property requirements as specified herein. Chemical composition is based on standard carbon steel grades modified to include microalloying elements. Strength level is specified based on desired mechanical properties in the forgings. Depending on the forging process, different strength classes may be attainable from a single chemical composition. Conversely, mechanical properties of a given strength class may be achieved using different chemical compositions. The manufacturer should be consulted if development of chemical composition is necessary. 1.3 For the purpose of this specification, forgings with maximum section thickness of 4 in. [100 mm] are to be considered. 1.4 Supplementary Requirements S1 to S8 are provided for use when additional controls or requirements are desired. These shall apply only when specified on the purchase order. 1.5 The values stated in either inch-pound units or SI (metric) units are to be regarded separately as standard. Within the text and tables, SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with this specification. 1.6 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units. |
||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||
|
Historická
1.10.2013
Historická
1.3.2014
Historická
1.10.2013
Historická
1.11.2013
Historická
1.4.2013
Historická
1.6.2013
Posledná aktualizácia: 2024-12-13 (Počet položiek: 2 215 533)
© Copyright 2024 NORMSERVIS s.r.o.