Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
Automaticky preložený názov:
Štandard Specification pre oxid Oceľové výkovky pre súčasti tlakovej nádoby
NORMA vydaná dňa 1.11.2013
Označenie normy: ASTM A266/A266M-13
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2013
Kód tovaru: NS-1812
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
pressure vessel service, steel forgings&mdash,carbon, ICS Number Code 77.140.30 (Steels for pressure purposes), 77.140.85 (Iron and steel forgings)
1. Scope | |
1.1 This specification2 covers four grades of carbon steel forgings for boilers, pressure vessels, and associated equipment. Current |
Formerly |
Grade 1 |
Class 1 |
Grade 2 |
Class 2 |
Grade 3 |
Class 3 |
Grade 4 |
Class 4 |
1.2 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units.
Standard Test Methods for Determining Average Grain Size |
|
Standard Test Methods for Mechanical Testing of Steel Products´Metric |
|
Standard Specification for Steel Forgings, General Requirements |
|
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
|
Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
|
ASME Boiler and Pressure Vessel Code, Section IX Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Two Park Ave., New York, NY 10016-5990, http://www.asme.org. |
|
Standard Practice for Liquid Penetrant Testing for General Industry |
|
Standard Practice for Magnetic Particle Examination of Steel Forgings |
Historická
1.11.2012
Historická
1.3.2012
Historická
1.5.2012
Historická
1.10.2010
Historická
1.10.2013
Historická
1.10.2009
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.