ISO - Mezinárodní organizace pro standardizaci - strana 580

Normy ISO - Mezinárodní organizace pro standardizaci - strana 580

ISO (International Organization for Standardization - Mezinárodní organizace pro standardizaci) je největším světovým tvůrcem dobrovolných mezinárodních norem. Mezinárodní normy uvádějí současné specifikace produktů, služeb a osvědčených metod, čímž napomáhají zefektivnění průmyslu. Díky tomu, že jsou vytvářeny na základě mezinárodní shody, napomáhají při překonávání překážek v mezinárodním obchodu.

Zobrazenie ceny: bez DPH
Zobrazovaná mena:
Zoradiť podľa:

Upresniť výber pre "Normy ISO - strana 580" podľa:    


ISO/IEC/TR 14516-ed.1.0

Information technology - Security techniques - Guidelines for the use and management of Trusted Third Party services
(Technologies de l´information -- Techniques de securite -- Lignes directrices pour l´utilisation et la gestion des services de tiers de confiance)

Norma vydaná dňa 27.6.2002

Vybraný formát:

Zobraziť všetky technické informácie
207.40


SKLADOM
ISO/IEC 14517-ed.1.0

Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2,6 Gbytes per cartridge

Norma vydaná dňa 26.12.1996

Vybraný formát:
Anglicky -
Elektronické PDF (296.10 EUR)


Zobraziť všetky technické informácie
296.10


SKLADOM
ISO 14518:2005

Cranes — Requirements for test loads
(Appareils de levage a charge suspendue — Exigences pour les charges d´essai)

Norma vydaná dňa 25.1.2005

Vybraný formát:

Zobraziť všetky technické informácie
57.40


SKLADOM
ISO/IEC 14519-ed.2.0

Information technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API)

Norma vydaná dňa 20.12.2001

Vybraný formát:

Zobraziť všetky technické informácie
296.10


SKLADOM
ISO 1452-1:2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
(Systemes de canalisations en plastique pour l´alimentation en eau, pour branchements et collecteurs d´assainissement enterrés et aériens avec pression — Poly(chlorure de vinyle) non plastifié (PVC-U) — Partie 1: Généralités)

Norma vydaná dňa 1.12.2009

Vybraný formát:

Zobraziť všetky technické informácie
87.40


SKLADOM
ISO 1452-2:2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
(Systemes de canalisations en plastique pour l´alimentation en eau, pour branchements et collecteurs d´assainissement enterrés et aériens avec pression — Poly(chlorure de vinyle) non plastifié (PVC-U) — Partie 2: Tubes)

Norma vydaná dňa 1.12.2009

Vybraný formát:

Zobraziť všetky technické informácie
176.10


SKLADOM
ISO 1452-3:2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
(Systemes de canalisations en plastique pour l´alimentation en eau, pour branchements et collecteurs d´assainissement enterrés et aériens avec pression — Poly(chlorure de vinyle) non plastifié (PVC-U) — Partie 3: Raccords)

Norma vydaná dňa 1.12.2009

Vybraný formát:

Zobraziť všetky technické informácie
236.10


SKLADOM
ISO 1452-4:2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
(Systemes de canalisations en plastique pour l´alimentation en eau, pour branchements et collecteurs d´assainissement enterrés et aériens avec pression — Poly(chlorure de vinyle) non plastifié (PVC-U) — Partie 4: Robinets)

Norma vydaná dňa 1.12.2009

Vybraný formát:

Zobraziť všetky technické informácie
87.40


SKLADOM
ISO 1452-5:2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
(Systemes de canalisations en plastique pour l´alimentation en eau, pour branchements et collecteurs d´assainissement enterrés et aériens avec pression — Poly(chlorure de vinyle) non plastifié (PVC-U) — Partie 5: Aptitude a l´emploi du systeme)

Norma vydaná dňa 1.12.2009

Vybraný formát:

Zobraziť všetky technické informácie
130.50


SKLADOM
ISO 14520-1:2023-ed.4.0

Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements
(Systemes d´extinction d´incendie utilisant des agents gazeux — Propriétés physiques et conception des systemes — Partie 1: Exigences générales)

Norma vydaná dňa 3.2.2023

Vybraný formát:

Zobraziť všetky technické informácie
296.10


SKLADOM

Zobrazený záznam od 5790 až 5800 z celkom 26047 záznamov.


Potrebujete pomoc?


Cookies Cookies

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.

Súhlas môžete odmietnuť tu.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.