ISO - Mezinárodní organizace pro standardizaci - strana 2377

Normy ISO - Mezinárodní organizace pro standardizaci - strana 2377

ISO (International Organization for Standardization - Mezinárodní organizace pro standardizaci) je největším světovým tvůrcem dobrovolných mezinárodních norem. Mezinárodní normy uvádějí současné specifikace produktů, služeb a osvědčených metod, čímž napomáhají zefektivnění průmyslu. Díky tomu, že jsou vytvářeny na základě mezinárodní shody, napomáhají při překonávání překážek v mezinárodním obchodu.

Zobrazenie ceny: bez DPH
Zobrazovaná mena:
Zoradiť podľa:

Upresniť výber pre "Normy ISO - strana 2377" podľa:    


ISO 8275:2023-ed.2.0

Hinged or pivoted doors — Determination of the resistance to vertical load
(Portes battantes ou pivotantes — Détermination de la résistance a la charge verticale)

Norma vydaná dňa 8.2.2023

Vybraný formát:

Zobraziť všetky technické informácie
55.80


SKLADOM
ISO 8277:2013-ed.2.0

Ships and marine technology — Pipework and machinery — Information transfer
(Navires et technologie maritime — Tuyauteries et machines — Transmission d´informations)

Norma vydaná dňa 24.5.2013

Vybraný formát:

Zobraziť všetky technické informácie
84.30


SKLADOM
ISO 8278:2016-ed.2.0

Aerospace series — Hydraulic, pressure compensated, variable delivery pumps — General requirements
(Série aérospatiale — Pompes hydrauliques a débit variable régulé en fonction de la pression — Exigences générales)

Norma vydaná dňa 3.3.2016

Vybraný formát:

Zobraziť všetky technické informácie
229.50


SKLADOM
ISO 8279:2008-ed.3.0

Aerospace — Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 250 MPa (at ambient temperature)/235 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C — Dimensions
(Aéronautique et espace — Écrous hexagonaux ordinaires, hauteur normale, surplats normaux, filetages MJ, classifications: 600 MPa (a température ambiante)/120 degrés C, 600 MPa (a température ambiante)/235 degrés C, 900 MPa (a température ambiante)/425 degrés C, 1 100 MPa (a température ambiante)/235 degrés C, 1 100 MPa (a température ambiante)/315 degrés C, 1 100 MPa (a température ambiante)/650 degrés C, 1 210 MPa (a température ambiante)/730 degrés C, 1 250 MPa (a température ambiante)/235 degrés C et 1 550 MPa (a température ambiante)/600 degrés C — Dimensions)

Norma vydaná dňa 21.7.2008

Vybraný formát:

Zobraziť všetky technické informácie
55.80


SKLADOM
ISO 8280:1993

Aerospace — Rivets, solid, universal head, metallic material, with or without surface treatment — Dimensions
(Aéronautique et espace — Rivets ordinaires, a tete ronde aplatie, en matériau métallique, avec ou sans traitement de surface — Dimensions)

Norma vydaná dňa 23.12.1993

Vybraný formát:

Zobraziť všetky technické informácie
55.80


SKLADOM
ISO 8283-1:1991

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
(Tubes et raccords en matieres plastiques — Dimensions des emboîtures et des bouts mâles pour raccordement de tubes et raccords dans les systemes d´évacuation a l´intérieur des bâtiments — Partie 1: Poly(chlorure de vinyle) non plastifié (PVC-U) et poly (chlorure de vinyle) chloré (PVC-C))

Norma vydaná dňa 2.5.1991

Vybraný formát:

Zobraziť všetky technické informácie
84.30


SKLADOM
ISO 8283-2:1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
(Tubes et raccords en matieres plastiques — Dimensions des emboîtures et des bouts mâles pour raccordement de tubes et raccords dans les systemes d´évacuation a l´intérieur des bâtiments — Partie 2: Polyéthylene (PE))

Norma vydaná dňa 3.12.1992

Vybraný formát:

Zobraziť všetky technické informácie
55.80


SKLADOM
ISO 8283-3:1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
(Tubes et raccords en matieres plastiques — Dimensions des emboîtures et des bouts mâles pour raccordement de tubes et raccords dans les systemes d´évacuation a l´intérieur des bâtiments — Partie 3: Polypropylene (PP))

Norma vydaná dňa 3.12.1992

Vybraný formát:

Zobraziť všetky technické informácie
55.80


SKLADOM
ISO 8283-4:1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
(Tubes et raccords en matieres plastiques — Dimensions des emboîtures et des bouts mâles pour raccordement de tubes et raccords dans les systemes d´évacuation a l´intérieur des bâtiments — Partie 4: Acrylonitrile/butadiene/styrene (ABS))

Norma vydaná dňa 3.12.1992

Vybraný formát:

Zobraziť všetky technické informácie
84.30


SKLADOM
ISO 8284:2024

Traditional Chinese medicine — Simplified accelerated stress simulation methods
(Médecine traditionnelle chinoise — Méthodes simplifiées de simulation accélérée des contraintes)

Norma vydaná dňa 2.12.2024

Vybraný formát:

Zobraziť všetky technické informácie
171.20


SKLADOM

Zobrazený záznam od 23760 až 23770 z celkom 25834 záznamov.


Potrebujete pomoc?


Cookies Cookies

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.

Súhlas môžete odmietnuť tu.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.