ISO - Mezinárodní organizace pro standardizaci - strana 1975

Normy ISO - Mezinárodní organizace pro standardizaci - strana 1975

ISO (International Organization for Standardization - Mezinárodní organizace pro standardizaci) je největším světovým tvůrcem dobrovolných mezinárodních norem. Mezinárodní normy uvádějí současné specifikace produktů, služeb a osvědčených metod, čímž napomáhají zefektivnění průmyslu. Díky tomu, že jsou vytvářeny na základě mezinárodní shody, napomáhají při překonávání překážek v mezinárodním obchodu.

Zobrazenie ceny: bez DPH
Zobrazovaná mena:
Zoradiť podľa:

Upresniť výber pre "Normy ISO - strana 1975" podľa:    


ISO 4427-3:2019-ed.2.0

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
(Systemes de canalisations en plastique destinés a l´alimentation en eau et aux branchements et collecteurs d´assainissement sous pression — Polyéthylene (PE) — Partie 3: Raccords)

Norma vydaná dňa 6.8.2019

Vybraný formát:

Zobraziť všetky technické informácie
208.00


SKLADOM
ISO 4427-5:2019-ed.2.0

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
(Systemes de canalisations en plastique destinés a l´alimentation en eau et aux branchements et collecteurs d´assainissement sous pression — Polyéthylene (PE) — Partie 5: Aptitude a l´emploi du systeme)

Norma vydaná dňa 6.8.2019

Vybraný formát:

Zobraziť všetky technické informácie
87.70


SKLADOM
ISO 4433-1:1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method
(Tubes en matieres thermoplastiques — Résistance aux liquides chimiques — Classification — Partie 1: Méthode d´essai d´immersion)

Norma vydaná dňa 18.12.1997

Vybraný formát:

Zobraziť všetky technické informácie
130.80


SKLADOM
ISO 4433-2:1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes
(Tubes en matieres thermoplastiques — Résistance aux liquides chimiques — Classification — Partie 2: Tubes en polyoléfines)

Norma vydaná dňa 18.12.1997

Vybraný formát:

Zobraziť všetky technické informácie
130.80


SKLADOM
ISO 4433-3:1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes
(Tubes en matieres thermoplastiques — Résistance aux liquides chimiques — Classification — Partie 3: Tubes en poly(chlorure de vinyle) non plastifié (PVC-U), poly (chlorure de vinyle) a résistance au choc améliorée (PVC-choc) et poly (chlorure de vinyle) chloré (PVC-C))

Norma vydaná dňa 18.12.1997

Vybraný formát:

Zobraziť všetky technické informácie
87.70


SKLADOM
ISO 4433-4:1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 4: Poly(vinylidene fluoride) (PVDF) pipes
(Tubes en matieres thermoplastiques — Résistance aux liquides chimiques — Classification — Partie 4: Tubes en poly(fluorure de vinylidene) (PVDF))

Norma vydaná dňa 18.12.1997

Vybraný formát:

Zobraziť všetky technické informácie
87.70


SKLADOM
ISO 4435:2003-ed.2.0

Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U)
(Systemes de canalisations en plastique pour les branchements et les collecteurs d´assainissement enterrés sans pression — Poly(chlorure de vinyle) non plastifié (PVC-U))

Norma vydaná dňa 13.2.2003

Vybraný formát:

Zobraziť všetky technické informácie
176.60


SKLADOM
ISO 4437-1:2024-ed.2.0

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
(Systemes de canalisations en plastique pour la distribution de combustibles gazeux — Polyéthylene (PE) — Partie 1: Généralités)

Norma vydaná dňa 14.2.2024

Vybraný formát:

Zobraziť všetky technické informácie
176.60


SKLADOM
ISO 4437-2:2024-ed.2.0

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
(Systemes de canalisations en plastique pour la distribution de combustibles gazeux — Polyéthylene (PE) — Partie 2: Tubes)

Norma vydaná dňa 14.2.2024

Vybraný formát:

Zobraziť všetky technické informácie
176.60


SKLADOM
ISO 4437-3:2024-ed.2.0

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
(Systemes de canalisations en plastique pour la distribution de combustibles gazeux — Polyéthylene (PE) — Partie 3: Raccords)

Norma vydaná dňa 14.2.2024

Vybraný formát:

Zobraziť všetky technické informácie
208.00


SKLADOM

Zobrazený záznam od 19740 až 19750 z celkom 25933 záznamov.


Potrebujete pomoc?


Cookies Cookies

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.

Súhlas môžete odmietnuť tu.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.