Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM Volume 15.01 - Refractories; Activated Carbon; Advanced Ceramics
ASTM Volume 15.01 - Refractories; Activated Carbon; Advanced Ceramics
PUBLIKÁCIE vydaná dňa 1.3.2021
| Dostupnosť | Vypredané |
| Cena | NA OTÁZKU bez DPH |
| NA OTÁZKU |
Informácie o produkte:
Označenie: ASTM Volume 15.01 - Refractories; Activated Carbon; Advanced Ceramics
Počet strán: 1282
Približná hmotnosť: 3877 g (8.55 libier)
Dátum vydania: 1.3.2021
Krajina: Americká publikácia
Anotácia textu normy:
Refractories — standards establish procedures for evaluating chemical behaviors, thermal properties, and strength. Others cover monolithics and refractories for glass.Activated Carbon — specifications and test methods evaluate the properties of activated carbon, including gas phase evaluation tests and liquid phase evaluation.Advanced Ceramics — standards cover thermal systems including heat engines and heat exchangers; armor; fuel cells; sensors/actuators; electronics; coatings; and catalyst substrates. Most feature tests in the areas of mechanical properties, physical properties, performance, and ceramic composites.
Table of Contents
| C16-03(2018) | Standard Test Method for Load Testing Refractory Shapes at High Temperatures |
| C20-00(2015) | Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water |
| C24-09(2018) | Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials |
| C27-98(2018) | Standard Classification of Fireclay and High-Alumina Refractory Brick |
| C71-12(2018) | Standard Terminology Relating to Refractories |
| C92-95(2015) | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| C108-46(2018) | Standard Symbols for Heat Transmission |
| C113-14(2019) | Standard Test Method for Reheat Change of Refractory Brick |
| C133-97(2021) | Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories |
| C134-95(2016) | Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick |
| C135-96(2015) | Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
| C155-97(2018) | Standard Classification of Insulating Firebrick |
| C179-14(2019) | Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens |
| C181-11(2018) | Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics |
| C182-19 | Standard Test Method for Thermal Conductivity of Insulating Firebrick |
| C198-09(2019) | Standard Test Method for Cold Bonding Strength of Refractory Mortar |
| C199-84(2016) | Standard Test Method for Pier Test for Refractory Mortars |
| C201-93(2019) | Standard Test Method for Thermal Conductivity of Refractories |
| C202-19 | Standard Test Method for Thermal Conductivity of Refractory Brick |
| C210-95(2019) | Standard Test Method for Reheat Change of Insulating Firebrick |
| C288-20 | Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide |
| C357-07(2015) | Standard Test Method for Bulk Density of Granular Refractory Materials |
| C401-12(2018) | Standard Classification of Alumina and Alumina-Silicate Castable Refractories |
| C416-97(2018) | Standard Classification of Silica Refractory Brick |
| C417-21 | Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories |
| C454-10(2017) | Standard Test Method for Disintegration of Carbon Refractories by Alkali |
| C455-07(2018) | Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick |
| C456-18 | Standard Test Method for Hydration Resistance of Basic Bricks and Shapes |
| C467-14(2018) | Standard Classification of Mullite Refractories |
| C492-92(2017)e1 | Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
| C544-18 | Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain |
| C545-97(2018) | Standard Classification of Zircon Refractories |
| C577-19 | Standard Test Method for Permeability of Refractories |
| C583-15(2021) | Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures |
| C604-18 | Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer |
| C607-88(2016) | Standard Practice for Coking Large Shapes of Carbon-Bearing Materials |
| C621-09(2018) | Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass |
| C673-97(2018) | Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes |
| C704/C704M-15e1 | Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature |
| C767-20 | Standard Test Method for Thermal Conductivity of Carbon Refractories |
| C830-00(2016) | Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure |
| C831-18 | Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes |
| C832-21 | Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load |
| C860-15(2019) | Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test |
| C861-93(2020) | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
| C862-16(2020) | Standard Practice for Preparing Refractory Concrete Specimens by Casting |
| C863-00(2016) | Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures |
| C865-17 | Standard Practice for Firing Refractory Concrete Specimens |
| C874-20 | Standard Test Method for Rotary Slag Testing of Refractory Materials |
| C885-87(2020) | Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance |
| C899-79(2018) | Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials |
| C903-15(2020) | Standard Practice for Preparing Refractory Specimens by Cold Gunning |
| C909-18 | Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes |
| C914-09(2015) | Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion |
| C973-87(2020) | Standard Practice for Preparing Test Specimens from Basic Refractory Gunning Products by Pressing |
| C974-87(2020) | Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting |
| C975-87(2020) | Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing |
| C987-10(2019) | Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures |
| C1054-18 | Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens |
| C1070-01(2020) | Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering |
| C1099-07(2019) | Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures |
| C1113/C1113M-09(2019) | Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
| C1145-19 | Standard Terminology of Advanced Ceramics |
| C1161-18 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature |
| C1171-16 | Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories |
| C1190-18 | Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick |
| C1198-20 | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance |
| C1211-18 | Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures |
| C1223-19 | Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories |
| C1239-13(2018) | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics |
| C1259-21 | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| C1273-18 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
| C1274-12(2020) | Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption |
| C1275-18 | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
| C1291-18 | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics |
| C1292-16 | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| C1322-15(2019) | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
| C1323-16 | Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature |
| C1326-13(2018) | Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics |
| C1327-15(2019) | Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics |
| C1337-17 | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures |
| C1341-13(2018) | Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites |
| C1358-18 | Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures |
| C1359-18e1 | Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures |
| C1360-17 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| C1361-10(2019) | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
| C1366-19 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
| C1368-18 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature |
| C1407-98(2016) | Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes |
| C1419-14(2020) | Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Youngs Modulus |
| C1421-18 | Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature |
| C1424-15(2019) | Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature |
| C1425-19 | Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
| C1445-13(2018) | Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table |
| C1446-19 | Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories |
| C1465-08(2019) | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
| C1468-19a | Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature |
| C1469-10(2015) | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
| C1470-20 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
| C1494-13(2018) | Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder |
| C1495-16 | Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics |
| C1499-19 | Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature |
| C1525-18 | Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching |
| C1547-02(2018) | Standard Classification for Fusion-Cast Refractory Blocks and Shapes |
| C1548-02(2020) | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration |
| C1557-20 | Standard Test Method for Tensile Strength and Youngs Modulus of Fibers |
| C1576-05(2017) | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature |
| C1624-05(2015) | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
| C1655-06(2016) | Standard Classification of Fireclay and High-Alumina Mortars |
| C1656-13(2018) | Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile |
| C1674-16 | Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures |
| C1678-21 | Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses |
| C1683-10(2019) | Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics |
| C1684-18 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength |
| C1730-17 | Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation |
| C1773-21 | Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
| C1783-15 | Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications |
| C1793-15 | Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications |
| C1819-21 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
| C1834-16 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures |
| C1835-16 | Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures |
| C1836-16 | Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures |
| C1862-17 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
| C1863-18 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization |
| C1869-18 | Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites |
| C1899-21 | Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
| D2652-21 | Standard Terminology Relating to Activated Carbon |
| D2854-09(2019) | Standard Test Method for Apparent Density of Activated Carbon |
| D2862-16 | Standard Test Method for Particle Size Distribution of Granular Activated Carbon |
| D2866-11(2018) | Standard Test Method for Total Ash Content of Activated Carbon |
| D2867-17 | Standard Test Methods for Moisture in Activated Carbon |
| D3466-06(2018) | Standard Test Method for Ignition Temperature of Granular Activated Carbon |
| D3467-04(2020) | Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon |
| D3802-16 | Standard Test Method for Ball-Pan Hardness of Activated Carbon |
| D3803-91(2014) | Standard Test Method for Nuclear-Grade Activated Carbon |
| D3838-05(2017) | Standard Test Method for pH of Activated Carbon |
| D3860-98(2020) | Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique |
| D4069-95(2020) | Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams |
| D4607-14(2021) | Standard Test Method for Determination of Iodine Number of Activated Carbon |
| D5029-98(2020) | Standard Test Method for Water Solubles in Activated Carbon |
| D5158-98(2019) | Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving |
| D5159-21 | Standard Guide for Dusting Attrition of Granular Activated Carbon |
| D5160-95(2019) | Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon |
| D5228-16 | Standard Test Method for Determination of Butane Working Capacity of Activated Carbon |
| D5742-16 | Standard Test Method for Determination of Butane Activity of Activated Carbon |
| D5832-98(2021) | Standard Test Method for Volatile Matter Content of Activated Carbon Samples |
| D5919-96(2017) | Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations |
| D6385-99(2017) | Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing |
| D6586-03(2021) | Standard Practice for the Prediction of Contaminant Adsorption on GAC in Aqueous Systems Using Rapid Small-Scale Column Tests |
| D6646-03(2014) | Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon |
| D6647-18 | Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption |
| D6781-02(2021) | Standard Guide for Carbon Reactivation |
| D6851-20 | Standard Test Method for Determination of Contact pH with Activated Carbon |
| D7385-21 | Standard Guide for Estimating Carbon Saturation by Temperature Rise Upon Immersion |
| D8176-18 | Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh) |
Doporučujeme:
