Norma IEC/IEEE 60079-30-2-ed.1.0 28.9.2015 náhľad

IEC/IEEE 60079-30-2-ed.1.0

Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

Automaticky preložený názov:

Výbuchu - Časť 30-2 : Elektrické odporové sprievodné kúrenie - sprievodca aplikácie pre projektovanie , inštaláciu a údržbu



NORMA vydaná dňa 28.9.2015


Jazyk
Prevedenie
DostupnosťSKLADOM
Cena441.70 bez DPH
441.70

Informácie o norme:

Označenie normy: IEC/IEEE 60079-30-2-ed.1.0
Dátum vydania normy: 28.9.2015
Kód tovaru: NS-616216
Počet strán: 69
Približná hmotnosť: 207 g (0.46 libier)
Krajina: Medzinárodná technická norma
Kategória: Technické normy IEC

Anotácia textu normy IEC/IEEE 60079-30-2-ed.1.0 :

IEC/IEEE 60079-30-2:2015 provides guidance for the application of electrical resistance trace heating systems in areas where explosive atmospheres may be present, with the exclusion of those classified as requiring EPL Ga/Da (traditional relationship to Zone 0 and Zone 20 respectively). This standard also provides guidance for explosive atmospheres incorporating the Division method of area classification that may be applied by some users of this standard. It provides recommendations for the design, installation, maintenance and repair of trace heating systems including associated control and monitoring equipment. It does not cover devices that operate by induction heating, skin effect heating or direct pipeline heating, nor those intended for stress relieving. This first edition of IEC/IEEE 60079-30-2 cancels and replaces the first edition of IEC 60079-30-2 published in 2007 and constitutes a technical revision. This edition includes the following significant changes, apart from a general review and updating of the first edition of IEC 60079-30-2, harmonization with IEEE Std.515, with respect to the previous edition: - the relocation of trace heater product design methodology and requirements to IEC/IEEE 60079-30-1; - the relocation and/or duplication of information on installation, maintenance, and repair to the MTs under SC31J for their addition into IEC 60079-14, IEC 60079-17, and IEC 60079-19; - the inclusion of more detailed information on safety showers and eyewash units; - the introduction of Annexes from IEEE Std. 515. Please refer to the Foreword of the document for the significance of changes between IEC 60079-30-2, Edition 1.0 (2007) and IEC/IEEE 60079-30-2, Edition 1.0 (2014). Keywords: electrical resistance trace heating systems, Division method of area classification

IEC/IEEE 60079-30-2:2015 fournit des lignes directrices pour lapplication des systemes de tracage par resistance electrique dans les emplacements ou des atmospheres explosives peuvent etre presentes, a l’exception de ceux classes comme exigeant lEPL Ga/Da (relation traditionnelle a la Zone 0 et la Zone 20, respectivement). La presente norme donne egalement des lignes directrices relatives aux atmospheres explosives integrant la methode de classement des emplacements par division qui peut etre appliquee par certains utilisateurs de la presente norme. Elle fournit des recommandations pour la conception, linstallation, la maintenance et la reparation des systemes de tracage, y compris le materiel associe de commande et de surveillance. Elle ne couvre pas les dispositifs qui fonctionnent par chauffage par induction, chauffage a effet de peau ou chauffage par impedance, ni ceux destines au relachement des contraintes.
Cette premiere edition de lIEC/IEEE 60079-30-2 annule et remplace la premiere edition de lIEC 60079-30-2 parue en 2007. Cette edition constitue une revision technique. Cette edition inclut les modifications techniques majeures suivantes, hormis la revision generale et la mise a jour de la premiere edition de lIEC 60079-30-2 et de lharmonisation avec la norme IEEE 515, par rapport a ledition precedente: - deplacement de la methode de conception des resistances de tracage et des exigences dans lIEC/IEEE 60079-30-1; - deplacement et/ou reproduction des informations relatives a linstallation, la maintenance et la reparation a l’intention des equipes de maintenance (MT) relevant du SC31J, dans lIEC 60079-14, lIEC 60079-17 et lIEC 60079-19; - introduction dinformations plus detaillees relatives aux douches de securite et aux bassins oculaires; - introduction des Annexes issues de la norme IEEE 515. Reference a lavant-propos du document concernant limportance des modifications entre la CEI 60079-30-2, edition 1.0 (2007) et la CEI / IEEE 60079-30-2, edition 1.0 (2014)

Odporúčame:

Aktualizácia zákonov

Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.




Cookies Cookies

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.

Súhlas môžete odmietnuť tu.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.