ČSN ETSI EN 302208-V3.4.1 (875121)

Kategórie - podobné normy:

Přijímací a vysílací radiokomunikační zařízení

Anotácia textu normy ČSN ETSI EN 302208-V3.4.1 (875121):

V3.4.1

The present document specifies technical characteristics and methods of measurements for Radio Frequency Identification (RFID) devices used in the frequency band 865 MHz to 868 MHz and 915 MHz to 921 MHz.

Power limits up to a maximum of 2 W e.r.p. are specified for this equipment in the frequency band 865 MHz to 868 MHz and up to a maximum of 4 W e.r.p. in the frequency band 915 MHz to 921 MHz.

NOTE 1 - The term frequency band is used for reference to dedicated bands as described in ERC Recommendation 70-03 [i.9], while frequency range is used in the other cases.

The frequency usage conditions for RFID are EU wide harmonised in the band 865 MHz to 868 MHz according to Decision (EU) 2017/1483 [i.15] and in the band 915 MHz to 921 MHz according to Decision (EU) 2018/1538 [i.14]. According to Decision (EU) 2018/1538 [i.14], EU member states are requested to implement 3 channels only in the 915 MHz to 921 MHz band.

It should be noted that the frequency band 915 MHz to 921 MHz has only a limited implementation status within the European Union and the CEPT countries. ERC Recommendation 70-03 [i.9] provides in appendix 1 an overview of countries where the band is implemented.

The present document applies to RFID interrogators and tags operating together as a system. For each specified band, multiple high power channels are made available for use by interrogators. The tags respond with a modulated signal preferably in the adjacent low power channels. Interrogators may be used with either integral or external antennas.

The types of equipment covered by the present document are as follows:

• - fixed interrogators;
• - portable interrogators;
• - batteryless tags;
• - battery assisted tags;
• - battery powered tags.

These types of radio equipment are capable of operating in the frequency ranges given in table 1 and table 2.

The present document contains requirements to demonstrate that the specified radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference.

NOTE 2 - The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.3] is given in annex A