Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ČSN ETSI EN 301473-V2.1.2 (876042)
Družicové pozemské stanice a systémy (SES) - Harmonizovaná norma pro letadlové pozemské stanice (AES) provozované v kmitočtovém pásmu pod 3 GHz leteckou pohyblivou družicovou službou (AMSS)/pohyblivou družicovou službou (MSS) a/nebo pod leteckou pohyblivou družicovou směrovací službou (AMS(R) S)/pohyblivou družicovou službou (MSS), pokrývající základní požadavky článku 3.2 Směrnice 2014/53/EU (Norma k přímému použití jako ČSN).
NORMA vydaná dňa 1.5.2017
Informácie o norme:
Označenie normy: ČSN ETSI EN 301473-V2.1.2
Rozlišovací znak: 876042
Katalógové číslo: 501768
Dátum vydania normy: 1.5.2017
Kód tovaru: NS-681934
Počet strán: 92
Približná hmotnosť: 307 g (0.68 libier)
Krajina: Česká technická norma
Kategória: Technické normy ČSN
Kategórie - podobné normy:
Přenosové radiokomunikační systémy a systémy stacionárních družic
Anotácia textu normy ČSN ETSI EN 301473-V2.1.2 (876042):
V2.1.2 The present document specifies certain minimum technical performance requirements of Aircraft Earth Station (AES) equipment with both transmit and receive capabilities for operation in the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS), and/or in the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), in the frequency bands given in table 1. The technical requirements in the present document are in three major categories: - emission limits: to protect other radio services and systems from harmful interference generated by the AES in normal use; - AES Control and Monitoring Functions (CMF): to protect other radio services and systems from unwanted transmissions from the AES. The CMF in each AES is capable of answering to commands from the Network Control Facilities (NCF) for its supporting satellite network; - receiver performance specifications: to enable reception of a wanted signal in presence of other high power signals on the adjacent channel and/or adjacent band. NOTE 1: The requirements for Network Control Facilities (NCF) for S-PCN MES transmitting in the 1 610 MHz to 1 626,5 MHz band or the 1 980 MHz to 2 010 MHz band are contained in ETSI ETS 300 735 [4]; these requirements are also applicable to AES transmitting in those bands. An AES may be subject to additional or alternative requirements in other standards depending on its functionality, in particular if it supports a service which is considered a justified case for regulation of terminal equipment interworking via the public telecommunications network. An AES will also be subject to additional airworthiness certification requirements. The present document is intended to cover the provisions of Directive 2014/53/EU [i.4] (RE Directive) article 3.2 which states that "Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the RE Directive [i.4] may apply to equipment within the scope of the present document. NOTE 2: A list of such ENs is included on the web site
Náhľad normy ČSN ETSI EN 301473-V2.1.2 (876042)
Odporúčame:
Aktualizácia zákonov
Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
