Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Bezšňůrové mikrofony - Zvukové PMSE až do 3 GHz - Část 2: Přijímače třídy B - Harmonizovaná norma pokrývající základní požadavky článku 3.2 Směrnice 2014/53/EU (Norma k přímému použití jako ČSN).
NORMA vydaná dňa 1.9.2017
Označenie normy: ČSN ETSI EN 300422-2-V2.1.1
Rozlišovací znak: 875032
Katalógové číslo: 502422
Dátum vydania normy: 1.9.2017
Kód tovaru: NS-693267
Počet strán: 68
Približná hmotnosť: 204 g (0.45 libier)
Krajina: Česká technická norma
Kategória: Technické normy ČSN
V2.1.1 The present document specifies the technical characteristics and methods of measurement for the following types of equipment: a) Assistive Listening Devices (ALDs); b) Radio Microphones; c) In-Ear Monitoring Systems; d) Wireless Multichannel Audio Systems (WMAS); e) Tour Guide Systems; with Class B receivers which have reduced performance requirements with respect to sensitivity, adjacent channel selectivity, and receiver blocking compared to those with Class A receivers. It does not necessarily include all the characteristics that may be required by a user, nor does it necessarily represent the optimum performance achievable. Equipment with Class B receivers will support the operation of fewer wireless audio channels in a given amount of spectrum than Class A receivers. The present document applies to equipment operating on radio frequencies up to 3 GHz (as shown in table 1) using analogue, digital and hybrid (using both analogue and digital) modulation. The maximum power recommended for equipment covered by this multi-part deliverable is 250 mW for radio microphones and 10 mW for ALDs. An exception to this are the Public Hearing Aids defined in the CEPT Report 004 [i.7] and subsequent EC Decision 2005/928/EC [i.9] and EC Decision 2006/771/EC [i.8] on the ex ERMES band (169,4 MHz to 169,8125 MHz) where 500 mW is defined. The present document covers the essential requirements of Article 3.2 of Directive 2014/53/EU under the conditions identified in annex A. The present document also covers radio microphones used in the 863 MHz to 865 MHz band, with a maximum power of 10 mW. Electromagnetic Compatibility (EMC) requirements are covered by ETSI EN 301 489 9 [i.4]. National regulations on: 1) maximum power output; 2) licensing status; will take precedence or those detailed in the latest version of: " EC Decision 2005/928/EC [i.9]; " ECC/DEC/(05)02 [i.10]; " the EC SRD Decision [i.8]; or " CEPT/ERC/REC 70-03 [i.6], annex 10 (see " EC Decision 2014/641/EU [i.11]. Unless otherwise stated in the EC SRD Decision, ECC Decision or National Interfaces, Radio Microphones can be subject to individual licence
Posledná aktualizácia: 2024-08-30 (Počet položiek: 2 345 304)
© Copyright 2024 NORMSERVIS s.r.o.