Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Svařovací materiály - Tyče a dráty pro obloukové svařování nelegovaných a jemnozrnných ocelí wolframovou elektrodou v inertním plynu a jejich svarové kovy - Klasifikace (Norma k přímému použití jako ČSN).
NORMA vydaná dňa 1.4.2025
Označenie normy: ČSN EN ISO 636
Rozlišovací znak: 055312
Katalógové číslo: 520793
Dátum vydania normy: 1.4.2025
Kód tovaru: NS-1217222
Počet strán: 28
Približná hmotnosť: 84 g (0.19 libier)
Krajina: Česká technická norma
Kategória: Technické normy ČSN
This document specifies requirements for classification of rods, wires and deposits in the as-welded condition and in the post-weld heat-treated condition for tungsten inert gas welding of non-alloy and fine-grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.
This document is a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.
a) Components which carry the suffix "system A" are applicable only to rods, wires and deposits classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this document.
b) Components which carry the suffix "system B" are applicable only to rods, wires and deposits classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with this document.
c) Components which have neither the suffix "system A" nor the suffix "system B" are applicable to all rods, wires and deposits classified in accordance with this document
Posledná aktualizácia: 2025-07-09 (Počet položiek: 2 207 504)
© Copyright 2025 NORMSERVIS s.r.o.