Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ČSN EN ISO 4589-3 (640756)
Plasty - Stanovení hořlavosti metodou kyslíkového čísla - Část 3: Zkouška při zvýšené teplotě (Norma k přímému použití jako ČSN).
NORMA vydaná dňa 1.11.2017
Informácie o norme:
Označenie normy: ČSN EN ISO 4589-3
Rozlišovací znak: 640756
Katalógové číslo: 503131
Dátum vydania normy: 1.11.2017
Kód tovaru: NS-799589
Počet strán: 32
Približná hmotnosť: 96 g (0.21 libier)
Krajina: Česká technická norma
Kategória: Technické normy ČSN
Kategórie - podobné normy:
Zápalnost a hořlavost materiálů a výrobků
Plastické hmoty obecně
Anotácia textu normy ČSN EN ISO 4589-3 (640756):
This document specifies methods for determining the minimum volume fraction of oxygen, in a mixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions over a range of temperatures between 25 °C and 150 °C. The range of temperatures is typically between 40 °C and 150 °C. The results are defined as temperature index values at the test temperature, which is typical of the practical temperature that a plastic material can experience in an overheated service situation. Methods are provided for testing materials that are self-supporting at the test temperature in the form of vertical bars or sheet up to 10,5 mm thick. However, they are not applicable to form V which requires a supporting frame as defined in ISO 4589-2:2017, Table 2. These methods are suitable for solid, laminated or cellular materials characterized by an apparent density 100 kg/m3 or higher. The methods are also applicable to some cellular materials having an apparent density of less than 100 kg/m3. A method is provided for testing flexible sheet or film materials while supported vertically. This document also includes a method (see Annex A) for determining the temperature at which the OI of small vertical test specimens in air is 20,9 % under specified test conditions. The temperature at which this occurs is defined as the flammability temperature (FT) and the method is limited to the determination of temperatures less than 400 °C. The method is not applicable to materials having an OI of <20,9 %. NOTE 1: It might not be possible to apply these methods satisfactorily to materials that exhibit high levels of shrinkage when heated, e.g. highly oriented thin film. NOTE 2: For assessing the flame propagation properties of cellular materials of density <100 kg/m3, attention is drawn to the method described in ISO 3582
Náhľad normy ČSN EN ISO 4589-3 (640756)
Doporučujeme:
