Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Analýza zemního plynu - Obsah křemíku v biometanu - Část 1: Stanovení celkového obsahu křemíku pomocí atomové emisní spektrometrie (AES) (Norma k přímému použití jako ČSN).
NORMA vydaná dňa 1.10.2023
Označenie normy: ČSN EN ISO 2613-1
Rozlišovací znak: 385581
Katalógové číslo: 517582
Dátum vydania normy: 1.10.2023
Kód tovaru: NS-1154736
Počet strán: 28
Približná hmotnosť: 84 g (0.19 libier)
Krajina: Česká technická norma
Kategória: Technické normy ČSN
This document is applicable to the measurement of the total silicon content in gaseous matrices such as biomethane and biogas. Silicon is present in a gas phase contained predominantly in siloxane compounds, trimethylsilane and trimethylsilanol. The analytical form of the silicon measured in liquid phase after conducted sampling and derivatization procedure is soluble hexafluorosilicate anion stable in slightly acidified media. Total silicon is expressed as a mass of silicon in the volume of the analysed gas.
This document is applicable to stated gaseous matrices with silicon concentrations up to 5 mg/m3, and it is prevalently intended for the biomethane matrices with Si mass concentration of 0,1 mg/m3 to 0,5 mg/m3.
With adaptation to ensure appropriate absorption efficiency, it can be used for higher concentrations. The detection limit of the method is estimated as 0,05 mg/m3 based on a gas sample volume of 0,020 m3. All compounds present in the gas phase are volatile at the absorption and derivatization temperature and gaseous organosilicon species are trapped in absorbance media and derivatized into analytical silicon that is measured by this method. The concentration of the silicon is measured in diluted derivatization media using atomic emission spectrometry upon atomisation/ionisation in microwave or inductively coupled plasma.
Unless specified otherwise, all volumes and concentrations refer to standard reference conditions (temperature, 273 K, and pressure, 101,325 kPa)
Posledná aktualizácia: 2025-05-08 (Počet položiek: 2 198 869)
© Copyright 2025 NORMSERVIS s.r.o.