Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
Automaticky preložený názov:
Štandardná prax pre použitie jedného Radiochromic svetlovodu dozimetria systému
NORMA vydaná dňa 21.3.2012
Označenie normy: ASTM/ISO 51310-04(2012)
Poznámka: NEPLATNÁ
Dátum vydania normy: 21.3.2012
Kód tovaru: NS-872
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
absorbed dose, dosimetry, electron beams, gamma radiation, ionizing radiation, optical waveguide dosimetry, quality control, radiation processing, ICS 17.240, ICS Number Code 17.240 (Radiation measurements)
Significance and Use |
4.1 The radiochromic optical waveguide dosimetry system provides a means of measuring absorbed dose in materials. Under the influence of ionizing radiation such as photons, chemical reactions take place in the radiochromic optical waveguide creating and/or modifying optical absorbance bands in the visible region of the spectrum. Optical response is determined at selected wavelengths using the equations in 3.1.6. Examples of appropriate wavelengths for the analysis for specific dosimetry systems are provided by their manufacturers and in Refs (1) through (5). 4.2 In the application of a specific dosimetry system, absorbed dose is determined by use of a calibration curve traceable to national or international standards. 4.3 The absorbed dose determined is usually specified in water. Absorbed dose in other materials may be determined by applying the conversion factors discussed in ISO/ASTM Guide 51261. NOTE 1—For a comprehensive discussion of various dosimetry methods applicable to the radiation types and energies discussed in this practice, see ICRU Reports 14, 17, and 34. 4.4 These dosimetry systems commonly are applied in the industrial radiation processing of a variety of products, for example, the sterilization of medical devices and radiation processing of foods (4-6). |
1. Scope |
This practice covers the procedures for handling, testing, and using a radiochromic optical waveguide dosimetry system to measure absorbed dose in materials irradiated by photons in terms of absorbed dose in water. 1.2 This practice applies to radiochromic optical waveguide dosimeters that can be used within part or all of the specified ranges as follows: 1.2.1 The absorbed dose range is from 1 to 10 000 Gy for photons. 1.2.2 The absorbed dose rate is from 0.001 to 1000 Gy/s. 1.2.3 The radiation energy range for photons is from 0.1 to 10 MeV. 1.2.4 The irradiation temperature range is from –78 to +60°C. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Historická
1.12.2010
Historická
1.11.2011
Historická
1.1.2010
Historická
1.1.2013
Historická
1.6.2013
Historická
1.1.2013
Posledná aktualizácia: 2024-12-23 (Počet položiek: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.