Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

NEPLATNÁ ASTM G173-03(2012) 1.11.2012 náhľad

Doplňujúce informácie

ASTM G173-03(2012)

Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface

Automaticky preložený názov:

Štandardné Stoly pre referenčné solárne spektrálny Irradiances: Priama Normálna a pologuľovitý na 37 ° naklonenej povrchy

NORMA vydaná dňa 1.11.2012

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 101.10 € Tlačené - 101.10 €
Dostupnosť	SKLADOM
Cena	101.10 € bez DPH
101.10 €

Informácie o norme:

Označenie normy: ASTM G173-03(2012)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2012
Kód tovaru: NS-57524
Počet strán: 21
Približná hmotnosť: 63 g (0.14 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Optika a optická měření obecně

Anotácia textu normy ASTM G173-03(2012) :

Keywords:
direct normal, hemispherical, irradiance, solar constant, solar spectrum, terrestrial, wavelength, ICS Number Code 17.180.01 (Optics and optical measurement in general)

Doplňujúce informácie


Significance and Use
4.1 Absorptance, reflectance, and transmittance of solar energy are important factors in material degradation studies, solar thermal system performance, solar photovoltaic system performance, biological studies, and solar simulation activities. These optical properties are normally functions of wavelength, which require the spectral distribution of the solar flux be known before the solar-weighted property can be calculated. To compare the relative performance of competitive products, or to compare the performance of products before and after being subjected to weathering or other exposure conditions, a reference standard solar spectral distribution is desirable. 4.2 These tables provide appropriate standard spectral irradiance distributions for determining the relative optical performance of materials, solar thermal, solar photovoltaic, and other systems. The tables may be used to evaluate components and materials for the purpose of solar simulation where either the direct or the hemispherical (that is, direct beam plus diffuse sky) spectral solar irradiance is desired. However, these tables are not intended to be used as a benchmark for ultraviolet radiation used in indoor exposure testing of materials using manufactured light sources. 4.3 The total integrated irradiances for the direct and hemispherical tilted spectra are 900.1 W·m^-2 and 1000.4 W·m^-2, respectively. Note that, in PV applications, no amplitude adjustments are required to match standard reporting condition irradiances of 1000 W·m^-2 for hemispherical irradiance. 4.4 Previously defined global hemispherical reference spectrum (G159) for a sun-facing 37°-tilted surface served well to meet the needs of the flat plate photovoltaic research, development, and industrial community. Investigation of prevailing conditions and measured spectra shows that this global hemispherical reference spectrum can be attained in practice under a variety of conditions, and that these conditions can be interpreted as representative for many combinations of atmospheric parameters. Earlier global hemispherical reference spectrum may be closely, but not exactly, reproduced with improved spectral wavelength range, uniform spectral interval, and spectral resolution equivalent to the spectral interval, using inputs in X1.4. 4.5 Reference spectra generated by the SMARTS Version 2.9.2 model for the indicated conditions are shown in Card ID	Value	Parameter/Description/Variable Name
1	'ASTM_G 173_Std_Spectra'	Header
2	1	Pressure input mode (1 = pressure and altitude): ISPR
2a	1013.25 0.	Station Pressure (mb) and altitude (km): SPR, ALT
3	1	Standard Atmosphere Profile Selection (1 = use default atmosphere): IATM1
3a	'USSA'	Default Standard Atmosphere Profile: ATM
4	1	Water Vapor Input (1 = default from Atmospheric Profile): IH2O
5	1	Ozone Calculation (1 = default from Atmospheric Profile): IO3
6	1	Pollution level mode (1 = standard conditions/no pollution): IGAS (see X1.3)
7	370	Carbon Dioxide volume mixing ratio (ppm): qCO2 (see 7a	1	Extraterrestrial Spectrum (1 = SMARTS/Gueymard): ISPCTR
8	'S&F_RURAL'	Aerosol Profile to Use: AEROS
9	0	Specification for aerosol optical depth/turbidity input (0 = AOD at 500 nm): ITURB
9a	0.084	Aerosol Optical Depth at 500 nm: TAU5
10	38	Far field Spectral Albedo file to use (38= Light Sandy Soil): IALBDX
10b	1	Specify tilt calculation (1 = yes): ITILT
10c	38 37 180	Albedo and Tilt variables-Albedo file to use for near field, Tilt, and Azimuth: IALBDG, TILT, WAZIM
11	280 4000 1.0 1367.0	Wavelength Range-start, stop, mean radius vector correction, integrated solar spectrum irradiance: WLMN, WLMX, SUNCOR, SOLARC
12	2	Separate spectral output file print mode (2 = yes): IPRT
12a	280 4000 .5	Output file wavelength-Print limits, start, stop, minimum step size: WPMN, WPMX, INTVL
12b	2	Number of output variables to print: IOTOT
12c	8 9	Code relating output variables to print (8 = Hemispherical tilt, 9 = direct normal + circumsolar): OUT(8), OUT(9)
13	1	Circumsolar calculation mode (1 = yes): ICIRC
13a	0 2.9 0	Receiver geometry-Slope, View, Limit half angles: SLOPE, APERT, LIMIT
14	0	Smooth function mode (0 = none): ISCAN
15	0	Illuminance calculation mode (0 = none): ILLUM
16	0	UV calculation mode (0 = none): IUV
17	2	Solar Geometry mode (2 = Air Mass): IMASS
17a	1.5	Air mass value: AMASS

4.6 The availability of the adjunct (ADJG173CD4.7 Differences from the previous standard spectra (G159) can be summarized as follows:

4.7.1 Extended spectral interval in the ultraviolet (down to 280 nm, rather than 305 nm),

4.7.2 Better resolution (2002 wavelengths, as compared to 120),

4.7.3 Constant intervals (0.5 nm below 400 nm, 1 nm between 400 and 1700 nm, and 5 nm above),

4.7.4 Better definition of atmospheric scattering and gaseous absorption, with more species considered,

4.7.5 Better defined extraterrestrial spectrum,

4.7.6 More realistic spectral ground reflectance, and

4.7.7 Lower aerosol optical depth, yielding significantly larger direct normal irradiance.

1. Scope

1.1 These tables contain terrestrial solar spectral irradiance distributions for use in terrestrial applications that require a standard reference spectral irradiance for hemispherical solar irradiance (consisting of both direct and diffuse components) incident on a sun-facing, 37° tilted surface or the direct normal spectral irradiance. The data contained in these tables reflect reference spectra with uniform wavelength interval (0.5 nanometer (nm) below 400 nm, 1 nm between 400 and 1700 nm, an intermediate wavelength at 1702 nm, and 5 nm intervals from 1705 to 4000 nm). The data tables represent reasonable cloudless atmospheric conditions favorable for photovoltaic (PV) energy production, as well as weathering and durability exposure applications.

1.2 The 37° slope of the sun-facing tilted surface was chosen to represent the average latitude of the 48 contiguous United States. A wide variety of orientations is possible for exposed surfaces. The availability of the SMARTS model (as an adjunct, ADJG173CD³) to this standard) used to generate the standard spectra allows users to evaluate differences relative to the surface specified here.

1.3 The air mass and atmospheric extinction parameters are chosen to provide (1) historical continuity with respect to previous standard spectra, (

E490-22

Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables

Simple Model for Atmospheric Transmission of Sunshine

E772-15(2021)

Standard Terminology of Solar Energy Conversion