Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
NORMA vydaná dňa 1.10.2018
Označenie normy: ASTM G157-98(2018)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2018
Kód tovaru: NS-904545
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
chemical process industry, crevice corrosion, general corrosion, iron-base corrosion resistant alloys, nickel-base corrosion resistant alloys, stress corrosion cracking,, ICS Number Code 71.120.01 (Equipment for the chemical industry in general),77.060 (Corrosion of metals)
Significance and Use | ||||||||||||||||
4.1 This guide is intended to provide a series of evaluations that will assist engineers dealing with chemical environments in selecting appropriate alloys (1-3). In chemical environments, an important issue for determining general corrosion resistance is the temperature at which an alloy transitions from corrosion at a low rate to corrosion at a much higher rate. Other important concerns include the tendency towards crevice corrosion and stress corrosion cracking resistance, especially in hot chloride-containing aqueous environments. 4.2 This guide is also intended for alloy developers to assist them in choosing environments and test methods that are of particular interest to the chemical process industries. 4.3 The use of this approach will allow direct comparisons to be made among alloys from various suppliers and, thereby, to assist engineers in selecting the most appropriate materials for further testing to determine suitability in their application. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This guide covers an evaluation approach that is designed to provide information on the corrosion properties of wrought iron- and nickel-based alloys for the chemical process industries. This guide incorporates test conditions for general corrosion measurements in a variety of environments, crevice corrosion resistance in chloride environments, and stress corrosion cracking resistance in chloride environments. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Posledná aktualizácia: 2024-12-21 (Počet položiek: 2 216 840)
© Copyright 2024 NORMSERVIS s.r.o.