Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
Automaticky preložený názov:
Štandardná skúšobná metóda pre stresu-Korózia titánových zliatin pri leteckých motorov čistiacimi prostriedkami
NORMA vydaná dňa 1.11.2012
Označenie normy: ASTM F945-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.11.2012
Kód tovaru: NS-57020
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
controlled temperature conditions, engine cleaners, maximum operating concentration, metallographic inspection, prestressed titanium alloys, stress-corrosion cracking (SCC), ICS Number Code 49.025.30 (Titanium)
Significance and Use | ||||||||
3.1 Because of the tendency of prestressed titanium alloy parts to crack if heated while in contact with certain chemical reagents, it is necessary to ensure that cleaning and maintenance materials will not initiate stress corrosion of titanium alloys under controlled conditions. For test specimens, two common titanium alloys are selected, one that is very susceptible (AMS 4916) and one that is not very susceptible (AMS 4911) to stress corrosion cracking. |
||||||||
1. Scope | ||||||||
1.1 This test method establishes a test procedure for determining the propensity of aircraft turbine engine cleaning and maintenance materials for causing stress corrosion cracking of titanium alloy parts. 1.2 The evaluation is conducted on representative titanium alloys by determining the effect of contact with cleaning and maintenance materials on tendency of prestressed titanium alloys to crack when subsequently heated to elevated temperatures. 1.3 Test conditions are based upon manufacturer's maximum recommended operating solution concentration. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for Methyl Ethyl
Ketone, Standard Specification for Nitration
Grade Toluene Standard Specification for Reagent
Water AMS 4916 Sheet, Strip, and Plate-8AL 1MO 1V,
Duplex Annealed |
NEPLATNÁ
1.12.1992
NEPLATNÁ
1.8.1994
NEPLATNÁ
1.2.1996
NEPLATNÁ
1.2.1996
NEPLATNÁ
1.12.1992
NEPLATNÁ
1.12.1992
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-12-23 (Počet položiek: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.