Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM F900-11(2017)
Standard Specification for Industrial and Commercial Steel Swing Gates
NORMA vydaná dňa 1.6.2017
Informácie o norme:
Označenie normy: ASTM F900-11(2017)
Dátum vydania normy: 1.6.2017
Kód tovaru: NS-687231
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM F900-11(2017) :
This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application. All gate hardware shall be of sufficient strength and durability to support the gate and repeated open-close cycles. Gate hinges shall be structurally capable of supporting the gate leaf and allow the gate to open and close without binding. Single gate latch shall be capable of retaining the gate in a closed position and shall have provision for a padlock. Double gate latch shall be a drop rod or plunger bar arranged to engage the gate stop. Locking devices shall be constructed so that the center drop rod or plunger bar cannot be raised when the gate is locked. The latching devices shall have provision for a padlock. Gate stops shall be provided for all double gates and shall be suitable for setting in concrete for the center drop rod or plunger. Gate keepers shall consist of a mechanical device for securing the free end of the gate when in full open position.
Keywords:
drop rod, gate leaf, hinges, keepers, latch, plunger, polymer, truss rods,, ICS Number Code 91.060.50 (Doors and windows)
Doplňujúce informácie
| 1. Scope | ||||||||
|
1.1 This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||
| 2. Referenced Documents | ||||||||
|
Doporučujeme:
