Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specifications for Personal Climbing Equipment (Includes all amendments And changes 6/3/2013).
Automaticky preložený názov:
Štandardné špecifikácie pre osobné horolezecké vybavenie
NORMA vydaná dňa 15.10.2012
Označenie normy: ASTM F887-12e1
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.10.2012
Kód tovaru: NS-56827
Počet strán: 26
Približná hmotnosť: 78 g (0.17 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
adjustable positioning lanyard, body belts, climber, climbing equipment, dee-rings, harnesses, keeper, lanyards, length adjusting device, locking snaphook, positioning strap, stirrup , shock absorbing lanyard, wood pole fall restriction device, ICS Number Code 97.220.40 (Outdoor and water sports equipment)
1. Scope | ||||||||||||||
1.1 This standard covers the specifications and qualification testing of the following: Climbers,
Climber straps,
Climber Pads,
Climber Footplates,
Body Belts,
Positioning Devices with Locking
Snaphooks/Carabiners,
Wood Pole Fall Restriction Devices
(WPFRD),
Harnesses,
Shock Absorbing Lanyards.
These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for arc resistance of harnesses and shock absorbing lanyards are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame. 1.2 Three types of climbers, Types A, B, and C, and two types of climber straps, Types A and B, are covered. 1.3 Two types of body belts, Types A and B, are covered. 1.4 Four types of positioning devices: three positioning straps, Types A, B, and C, and adjustable positioning lanyards are covered. 1.5 Two types of WPFRD, Types A and AB, are covered. 1.6 Two types of harnesses, Types A and B, are covered. 1.7 Two types of shock absorbing lanyards, Types A and B, are covered. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 The following safety hazards caveat pertains only to the test method portions, 9.2, 10.3, 11.2, 14.4, 15.3, 15.4, 19.2, 22.2, 23, 24, and 25 of these specifications: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Posledná aktualizácia: 2024-07-24 (Počet položiek: 2 338 963)
© Copyright 2024 NORMSERVIS s.r.o.