Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Nonferrous Nuts for General Use (Includes all amendments And changes 9/20/2018).
Automaticky preložený názov:
Štandard Specification pre neželezných oriešky pre všeobecné použitie
NORMA vydaná dňa 1.4.2013
Označenie normy: ASTM F467-13e2
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.4.2013
Kód tovaru: NS-55401
Počet strán: 10
Približná hmotnosť: 30 g (0.07 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
general use, nonferrous, nuts, ICS Number Code 21.060.20 (Nuts)
Significance and Use | ||||||||||||||||||||||||||||||||||||||||||||||||||||
11.1 For purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or calculated value shall be rounded in accordance with Practice E29. |
||||||||||||||||||||||||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||
1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications. 1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this specification are covered by Specification F468. 1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
|
B?18.2.2
|
Square and Hex Nuts
|
|
Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-To-Plane Technique (Withdrawn 1996)
|
|
Standard Test Methods for Chemical Analysis of Special Brasses and Bronzes (Withdrawn 2002)
|
|
Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
|
|
Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
|
|
Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
|
|
Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
|
|
Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
|
|
Standard Practice for Commercial Packaging
|
|
Standard Test Methods for Rockwell Hardness of Metallic Materials
|
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
|
Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
|
|
Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989)
|
|
Standard Test Method for Mercurous Nitrate Test for Copper Alloys
|
|
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
|
|
Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
|
|
Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003)
|
|
Standard Practice for Liquid Penetrant Examination for General Industry
|
|
Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002)
|
|
Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
|
|
Standard Test Methods for Chemical Analysis of Copper Alloys
|
|
Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
|
|
Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
|
|
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
|
|
Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
|
B?1.1
|
Unified Inch Screw Threads (UN and UNR Thread Form) |
Historická
15.5.2011
Historická
1.4.2012
Historická
1.11.2009
Historická
1.10.2007
Historická
1.10.2010
Historická
1.4.2012
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.