Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Evaluating the Reliability of Surface Mounted Device (SMD) Joints on a Flexible Circuit by a Rolling Mandrel Bend (Withdrawn 2024)
Automaticky preložený názov:
Štandardná skúšobná metóda pre hodnotenie spoľahlivosti zariadení pre povrchovú montáž ( SMD ) špáry na ohybnom obvode Rolling tŕňa Bend
NORMA vydaná dňa 1.6.2015
Označenie normy: ASTM F3147-15
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.6.2015
Kód tovaru: NS-611394
Počet strán: 3
Približná hmotnosť: 9 g (0.02 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
bend, conductive adhesive, encapsulant, land-pad, mandrel, printed flexible circuit, SMD, staking compound,, ICS Number Code 31.020 (Electronic components in general)
Significance and Use |
4.1 The existing Test Method F1995, while very useful, is difficult to conduct if an encapsulating dome is applied, and does not reveal the possible failures caused by mechanical stress incompatibility in the overall SMT joint. This mandrel bend test will reveal possible mechanical stress incompatibility between the various adhesives which can result in latent field failures during production handling or with thermal cycling in normal use. 4.2 The existing Test Method F2750 does not include specifics for SMD attachments and only addresses the conductivity change of the conductive trace. 4.3 The different combinations of SMD types, attachment medias, circuit substrates and process variation can account for significant variation in test outcome. 4.4 Bending of printed flexible circuit or their components can affect their visual appearance, mechanical integrity or electrical functionality. This test method simulates conditions that may be seen during manufacture, installation, or use. 4.5 Bend testing may be destructive, therefore any samples tested should be considered unfit for future use. |
1. Scope |
1.1 This test method covers a means to test a completed Surface Mounted Device (SMD) joint for bond strength and inter-layer stress compatibility 1.2 A completed SMD joint includes; SMD (LED, resistor, etc), PTF ink land (typically silver), conductive adhesive (typically silver), staking compound (non-conductive), and encapsulant (non-conductive). |
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-08-30 (Počet položiek: 2 345 304)
© Copyright 2024 NORMSERVIS s.r.o.