Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM F2700-08(2013)
Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating
Automaticky preložený názov:
Štandardná skúšobná metóda pre Nestabilná-štátne Heat Transfer Vyhodnotenie Flame odolných materiálov pre odev s prietokovým ohrevom
NORMA vydaná dňa 1.6.2013
Informácie o norme:
Označenie normy: ASTM F2700-08(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.6.2013
Kód tovaru: NS-54399
Počet strán: 12
Približná hmotnosť: 36 g (0.08 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM F2700-08(2013) :
Keywords:
apparel, flame resistance, heat transfer performance value,, protective clothing, thermal heat protection, ICS Number Code 13.340.10 (Protective clothing)
Doplňujúce informácie
| Significance and Use | ||||||||||||||
|
5.1 This test method is intended for the determination of the heat transfer performance value of a material, a combination of materials, or a comparison of different materials used in flame resistant clothing for workers exposed to combined convective and radiant thermal hazards. 5.2 This test method evaluates a material’s unsteady-state heat transfer properties when exposed to a continuous and constant heat source. Air movement at the face of the specimen and around the calorimeter can affect the measured heat transferred due to forced convective heat losses. Minimizing air movement around the specimen and test apparatus will aid in the repeatability of the results. 5.3 This test method maintains the specimen in a static, horizontal position and does not involve movement except that resulting from the exposure. 5.4 This test method specifies a standardized 84 ± 2 kW/m2 (2 ± 0.05 cal/cm2s) exposure condition. Different exposure conditions have the potential to produce different results. Use of other exposure conditions that are representative of the expected hazard are allowed but shall be reported with the results along with a determination of the exposure energy level stability. 5.5 This test method does not predict skin burn injury from the heat exposure. 1.1 This test method measures the
non-steady state heat transfer through flame resistant materials
for clothing subjected to a continuous, combined convective and
radiant heat exposure.
1.1.1 This test method is not applicable to materials that are not flame resistant. 1.1.2 This test method does not
predict a material’s skin burn injury performance from the
specified thermal energy exposure. It does not account for the
thermal energy contained in the test specimen after the exposure
has ceased.
1.2 This test method is used to
measure and describe the response of materials, products, or
assemblies to heat under controlled conditions, but does not by
itself incorporate all factors required for fire hazard or fire
risk assessment of the materials, products, or assemblies under
actual fire conditions.
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound or other units that are commonly used for thermal testing. 1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||
| 2. Referenced Documents | ||||||||||||||
|
Doporučujeme:
