Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM F2665-09(2014)

Standard Specification for Total Ankle Replacement Prosthesis

Automaticky preložený názov:

Štandardné špecifikácie pre piat náhradné protézy

NORMA vydaná dňa 15.7.2014

Jazyk
Prevedenie	Online zabezpečené PDF - 71.10 € Tlačené - 71.10 €
Dostupnosť	SKLADOM
Cena	71.10 € bez DPH
71.10 €

Informácie o norme:

Označenie normy: ASTM F2665-09(2014)
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.7.2014
Kód tovaru: NS-54338
Počet strán: 7
Približná hmotnosť: 21 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Pomůcky pro pohyb

Anotácia textu normy ASTM F2665-09(2014) :

Keywords:

ankle, ankle constraint, ankle prosthesis, arthroplasty, ankle wear, contact area, contact pressure, fatigue, particles, surface roughness, total ankle replacement (TAR), UHMWPE, ICS Number Code 11.180.10 (Aids and adaptations for moving)

Doplňujúce informácie

1. Scope

1.1 This specification covers total ankle replacement (TAR) prostheses used to provide functioning articulation by employing talar and tibial components that allow for a minimum of 15° of dorsiflexion and 15 to 25° (1)2 of plantar flexion, as determined by non-clinical testing.

1.2 Included within the scope of this specification are ankle components for primary and revision surgery with modular and non-modular designs, bearing components with fixed or mobile bearing designs, and components for cemented and/or cementless use.

1.3 This specification is intended to provide basic descriptions of material and prosthesis geometry. In addition, those characteristics determined to be important to 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

F1800-19e1	Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements (Includes all amendments and changes 1/17/2020).
F1814-22	Standard Guide for Evaluating Modular Hip and Knee Joint Components
F799-19	Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
F981-23	Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices
F983-86(2018)	Standard Practice for Permanent Marking of Orthopaedic Implant Components
F75-23	Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
F748-16	Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
F1537-20	Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
F1472-23	Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
F1377-21	Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538)
F1223-20	Standard Test Method for Determination of Total Knee Replacement Constraint
F1160-14(2017)e1	Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings (Includes all amendments and changes 1/19/2018).
F1147-05(2017)e1	Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings (Includes all amendments and changes 6/17/2022).
F1108-21	Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
F1044-05(2017)e1	Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings (Includes all amendments and changes 1/11/2018).
F136-13(2021)e1	Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) (Includes all amendments and changes 8/19/2021).
F90-23	Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
F86-21	Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
F67-13(2017)	Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
F138-19	Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
F562-22	Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
F451-21	Standard Specification for Acrylic Bone Cement
F1580-18	Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
F746-04(2021)	Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F745-07	Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications (Withdrawn 2012)
F732-17	Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
F648-21	Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
F565-21	Standard Practice for Care and Handling of Orthopedic Implants and Instruments
F563-00	Standard Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications (UNS R30563) (Withdrawn 2005)

Podobné normy:

STN EN ISO 10535..

NEPLATNÁ
1.5.2007

STN EN ISO 11199-2..

NEPLATNÁ
1.9.2005

STN EN ISO 11199-3..

1.9.2005

STN EN ISO 11334-1..

1.8.2007

STN EN ISO 11334-4..

NEPLATNÁ
1.8.2001

STN EN ISO 24415-1..

1.9.2009

Odporúčame:

Aktualizácia zákonov

Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.