Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Guide for Self-Closing/Self-Latching General-Purpose Gates (Withdrawn 2023)
Automaticky preložený názov:
Štandardné príručka pre samozatváracia / samopřidržení General-Purpose Gates
NORMA vydaná dňa 1.10.2014
Označenie normy: ASTM F2630-14
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2014
Kód tovaru: NS-54274
Počet strán: 2
Približná hmotnosť: 6 g (0.01 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
gates, pools, self-closing, self-latching, ICS Number Code 23.060.40 (Pressure regulators)
Significance and Use |
3.1 This guide sets forth minimum standard requirements for use in building codes and ordinances relating to self-closing and self-latching single leaf access, general-purpose gates. 3.2 This guide does not apply to double leaf or double drive access gates. 3.3 This guide does not have the effect of law, nor is it intended to supersede Americans with Disabilities Act (ADA) guidelines, local codes or ordinances of a more restrictive nature. |
1. Scope |
1.1 This guide establishes the recommended minimum requirements for the design, construction and performance of self-closing and self-latching single leaf, general-purpose access gates. It is intended to provide an added degree of reliability in the performance of the self-closing and self-latching devices mounted to these gates. 1.2 This guide should be referenced whenever any other standard requires a single leaf access gate to be self-closing and self-latching, with the exception of standards for pool or outdoor child safety gates. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. After installation and inspection, it is the responsibility of the homeowner or property manager to inspect and adjust the hardware, or the gate, or both, to compensate for ground movement and other factors so that the gate continues to effectively self-close and self-latch. |
Historická
1.5.2013
Historická
1.5.2013
Historická
1.11.2011
Historická
1.5.2011
Historická
1.4.2009
Historická
1.4.2009
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.