Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Guide for Self-Closing/Self-Latching General-Purpose Gates
Automaticky preložený názov:
Štandardné príručka pre samozatváracie / self - Latching General - Purpose Gates
NORMA vydaná dňa 15.2.2007
Označenie normy: ASTM F2630-07
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.2.2007
Kód tovaru: NS-54273
Počet strán: 2
Približná hmotnosť: 6 g (0.01 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
ICS Number Code 23.060.40 (Pressure regulators)
Significance and Use |
This guide sets forth minimum standard requirements for use in building codes and ordinances relating to self-closing and self-latching single leaf access, general-purpose gates. This guide does not apply to double leaf or double drive access gates. This guide does not have the effect of law, nor is it intended to supersede Americans with Disabilities Act (ADA) guidelines, local codes or ordinances of a more restrictive nature. |
1. Scope |
1.1 This guide establishes the recommended minimum requirements for the design, construction and performance of self-closing and self-latching single leaf, general-purpose access gates. It is intended to provide an added degree of reliability in the performance of the self-closing and self-latching devices mounted to these gates. 1.2 This guide should be referenced whenever any other standard requires a single leaf access gate to be self-closing and self-latching, with the exception of standards for pool or outdoor child safety gates. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. After installation and inspection, it is the responsibility of the homeowner or property manager to inspect and adjust the hardware, or the gate, or both, to compensate for ground movement and other factors so that the gate continues to effectively self-close and self-latch. |
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.