Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Norma ASTM F2581-12(2017) 1.9.2017 náhľad

Doplňujúce informácie

ASTM F2581-12(2017)

Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

NORMA vydaná dňa 1.9.2017

Jazyk
Prevedenie	PDF - okamžité stiahnutie - 66.40 € Tlačené - 66.40 €
Dostupnosť	SKLADOM
Cena	66.40 € bez DPH
66.40 €

Informácie o norme:

Označenie normy: ASTM F2581-12(2017)
Dátum vydania normy: 1.9.2017
Kód tovaru: NS-693832
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Implantáty pro chirurgii, protetiku a ortotiku
Vysokokvalitní oceli

Anotácia textu normy ASTM F2581-12(2017) :

This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 11manganese-17chromium-3molybdenum (UNS S29225) low-nickel stainless steel alloy bars and wires for surgical implants. The alloys shall be furnished in the annealed or cold-worked condition, and finished cold-drawn, pickled, ground, ground and polished, or as specified by the purchaser. Mechanical properties to which the alloys shall conform are ultimate tensile strength, yield strength, elongation, and reduction of area.

Keywords:

low-nickel, manganese, metals (for surgical implants), nitrogen strengthened, stainless steel, surgical applications,, ICS Number Code 11.040.40 (Implants for surgery, prothetics and orthotics),77.140.20 (Steels of high quality)

Doplňujúce informácie

1. Scope

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 11manganese-17chromium-3molybdenum low-nickel stainless steel alloy bar and wire for surgical implants.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

A262-15(2021)	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials
A555/A555M-23	Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
E10-23	Standard Test Method for Brinell Hardness of Metallic Materials
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E45-18a(2023)	Standard Test Methods for Determining the Inclusion Content of Steel (Includes all amendments and changes 11/6/2023).
F138-19	Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
E407-23	Standard Practice for Microetching Metals and Alloys
F746-04(2021)	Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F748-16	Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
F1314-18	Standard Specification for Wrought Nitrogen Strengthened 22 Chromium-13 Nickel-5 Manganese-2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
F1586-21	Standard Specification for Wrought Nitrogen Strengthened 21Chromium—10Nickel—3Manganese—2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
IEEE/ASTM SI 10	American National Standard for Metric Practice
AMS 2630	Inspection, Ultrasonic Product over 0.5 Inch (12.7 mm) Thick
A484/A484M-24	Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings
E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys (Includes all amendments and changes 2/23/2022).
E112-13(2021)	Standard Test Methods for Determining Average Grain Size

Doporučujeme:

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.