ASTM F1538-03(2009)..
ASTM F1580-12
ASTM F1581-08(2012)..
ASTM F1582-98(2011)..
ASTM F1586-13e1
ASTM F1609-08(2014)..
Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM F2514-08(2014)
Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
Automaticky preložený názov:
Štandardné príručka pre analýzy konečných prvkov (FEA) kovových vaskulárnych stentov Vystavený jednotných Radial Loading
NORMA vydaná dňa 1.3.2014
Informácie o norme:
Označenie normy: ASTM F2514-08(2014)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.3.2014
Kód tovaru: NS-54039
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM F2514-08(2014) :
Keywords:
contact, cyclic loading, displacement, fatigue loading, finite element analysis (FEA), model calibration, model validation, model verification, nonlinear models, radial loading, shape memory alloys, solution sensitivity, stents, strain, stress, ICS Number Code 11.040.40 (Implants for surgery, prothetics and orthotics)
Doplňujúce informácie
| Significance and Use |
|
4.1 Finite element analysis is a valuable method for evaluating the performance of metallic stents and in quantifying quantities such as internal stresses, internal strains, and deformation patterns due to applied external loads and boundary conditions. Many times an analysis is performed to correlate to and plan experimental tests. A finite element analysis is especially valuable in determining quantities that cannot be readily measured. |
| 1. Scope |
|
1.1 Purpose—This guide establishes general requirements and considerations for the development of finite element models used in the evaluation of the performance of a metallic vascular stent design under uniform radial loading. Suggested criteria are provided for evaluating the typical cases of metallic stents under uniform radially oriented and pulsatile loading. Recommended procedures for checking and validating the finite element model(s) are provided as a means to assess the model and analysis results. Finally, the recommended content of an engineering report covering the mechanical simulations is presented. 1.2 Limits: 1.2.1 This guide is limited in discussion to the finite element structural analysis of metallic stents of the following types: 1.2.1.1 Plastically deformable metal stents. 1.2.1.2 Self-expanding metal stents. 1.2.1.3 Plastically deformable metal portions of covered stents. 1.2.1.4 Metal portions of self-expanding covered metal stents. 1.2.2 The emphasis of the techniques described in this guide is intended for both elasto-plastic materials such as stainless steel, and superelastic materials such as nitinol. Unique concerns associated with stents designed for shape memory behavior are not addressed within this guide. 1.2.3 This guide does not consider changes to possible time varying conditions or different loadings related to vascular remodeling. 1.2.4 This guide is restricted to cases that involve the application of uniform radially oriented loading. 1.2.5 This guide does not provide guidance in the application or interpretation of FEA in determining fatigue life. 1.2.6 This guide is not intended to include complete descriptions of the finite element method, nor its theoretical basis and formulation. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. |
Podobné normy:
Historická
1.4.2009
Historická
1.3.2012
Historická
1.10.2012
Historická
1.12.2011
Historická
1.6.2013
Historická
1.3.2014
Odporúčame:
Aktualizácia technických noriem
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
