Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
Automaticky preložený názov:
Štandardné špecifikácie pre valčeky, ložiská, ihla, železnatý, Solid
NORMA vydaná dňa 1.5.2013
Označenie normy: ASTM F2511-05(2013)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.5.2013
Kód tovaru: NS-54035
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
bearing, ferrous roller, MIL-R-22440, needle roller, roller, ICS Number Code 21.100.01 (Bearings in general)
1. Scope | ||
1.1 This specification covers the procurement requirements for solid ferrous needle bearing rollers including the MS19065 spherical ended solid ferrous needle rollers as specified in Specification F2443. 1.2 Intended Use—The rollers covered in this specification are intended for use in bearings and bearing applications. 1.3 This specification contains many of the requirements of MIL-R-22440, which was originally developed by the Department of Defense and maintained by the Defense Supply Center in Richmond. The following government activity codes may be found in the Department of Defense, Standardization Directory SD-1. Preparing Activity |
Custodians |
Review Activities |
DLA-GS4 |
Army-AT |
Army-CR4 |
|
Navy-OS |
Air Force-84 |
|
Air Force-99 |
|
|
DLA-GS4 |
|
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ISO 5593 |
Rolling Bearings--Vocabulary |
ANSI/ASQ Z1.4 |
Sampling Procedures and Tables for Inspection by Attributes |
ASME Y14.5 |
Dimensioning and Tolerancing |
ASME B46.1 |
Surface Texture (Surface Roughness, Waviness, and Lay) |
Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End |
|
Standard Test Method for Microindentation Hardness of Materials |
|
Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness (Includes all amendments and changes 5/7/2019). |
|
MIL-STD-129 |
Military Marking for Shipment and Storage |
ISO 10012–1 |
Quality Assurance Requirements for Measuring Equipment |
Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
|
Standard Test Methods and Practices for Chemical Analysis of Steel Products |
|
Standard Test Methods for Rockwell Hardness of Metallic Materials |
|
Standard Specification for High-Carbon Anti-Friction Bearing Steel |
|
Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
|
Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
|
Standard Practice for Fabrication of Fiberboard Shipping Boxes |
|
Standard Specification for Strapping, Flat Steel and Seals |
|
Standard Practice for Commercial Packaging |
|
MIL-PRF-22191 |
Barrier Materials, Transparent, Flexible, Heat-Sealable |
SAE AMS-STD-66 |
Steel, Chemical Composition and Hardenability |
MIL-R-22440 |
Roller, Bearing, Needle, Ferrous, Solid |
MIL-STD-2073-1 |
DOD Standard Practice for Military Packaging |
MIL-PRF-131 |
Barrier Materials, Watervaporproof, Greaseproof, Flexible, Heat-Sealable |
SAE J418a |
Grain Size Determination of Steel |
Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
|
MIL-PRF-121 |
Barrier Materials, Greaseproof, Waterproof, Flexible, Heat-Sealable |
Historická
1.5.2010
Historická
1.11.2009
Historická
15.3.2014
Historická
1.1.2010
Historická
1.12.2012
Historická
1.5.2013
Posledná aktualizácia: 2024-11-04 (Počet položiek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.