Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
Automaticky preložený názov:
Štandardné Guide pre špecifikácie, nákup, inštaláciu a údržbu liateho-In-Place ihrisko povrchovej úpravy
NORMA vydaná dňa 15.5.2012
Označenie normy: ASTM F2479-12
Poznámka: NEPLATNÁ
Dátum vydania normy: 15.5.2012
Kód tovaru: NS-53967
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
accessibility, impact attenuation, playground, poured-in-place, ICS Number Code 97.200.40 (Playgrounds)
Significance and Use | ||||||
Every elevated play structure is required to have a protective surface installed and poured-in-place surfaces are one of the many choices. These surfaces are highly technical in structure, component selection, percentages of components and installation procedures. This guide is intended to assist the playground owner/operator, specification writer, designer, and so forth in determining the properties that can be considered with regard to the poured-in-place surface and set out considerations that the user of this guide should make to ensure a successful installation. This document is a guide and should not be used directly as a performance specification for poured-in-place surfacing. |
||||||
1. Scope | ||||||
1.1 This guide covers information with regard to the design, manufacture, installation, and maintenance of poured-in-place playground surfaces. Note 1—This document is a guide and not intended to be used as a specification; it should be used for educational purposes. 1.2 This guide outlines the issues of compliance with existing standards, durability, and functional longevity. 1.3 This guide reviews issues such as edge treatment, abutting surfaces, and combinations with other surfaces designed for circulation or protective surfaces. 1.4 This guide presents maintenance considerations and general procedures that should be followed by the owner/operator. 1.5 This guide outlines aging considerations such as loss of impact absorption, cracking, shrinkage, heaving, and how to prevent, accommodate, or rectify those issues. 1.6 This guide presents warranty considerations. 1.7 This guide does not imply that an injury cannot be incurred when the surface system is compliant with the standards referred to in this guide. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.6.2014
Historická
1.8.2010
Historická
1.3.2009
Historická
1.6.2013
Historická
1.5.2014
Historická
1.7.2010
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.