Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress: Two Different Test Methods—Score/Tape and Cross Hatch (Withdrawn 2020)
Automaticky preložený názov:
Štandardné praktiky pre stanovenie adhézie Tlačové médiá Využitie mechanickému namáhaniu: dva rôzne skúšobné metódy & ndash; score / pásku a šrafovanie
NORMA vydaná dňa 1.10.2012
Označenie normy: ASTM F2452-04(2012)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2012
Kód tovaru: NS-53905
Počet strán: 4
Približná hmotnosť: 12 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
accelerate aging, adhesion, bond strength, coating, debonding, ink jet, media, printing, thickness, ICS Number Code 37.100.10 (Reproduction equipment)
Significance and Use | ||
4.1 Good adhesion is a prime consideration for print media. For coated papers failure can occur between the coating and the substrate or between coated layers, while for uncoated papers failure can occur between the imaged area and the substrate. This practice utilizing mechanical stress allows comparative studies of print media by examining adhesion in both printed and unprinted areas. 4.2 Factors in the office and outdoor environments, such as heat, cold, thermal shock, ultraviolet/visible radiation and water vapor can have a similar effect on adhesion as mechanical stress. 4.3 This practice is used to obtain comparative data of adhesion strength of print media. |
||
1. Scope | ||
1.1 This practice describes procedures to obtain subjective, but comparative data for adhesion of print media used in printers, copies and other reprographic devices. 1.2 This method is applicable to constructions where the print media is subject to failure under mechanical stress from mostly peel conditions (that is, paper, film, cloth, and so forth). 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Historická
1.2.2009
Historická
1.10.2011
Historická
1.4.2013
Historická
1.4.2013
Historická
1.10.2011
Historická
1.4.2013
Posledná aktualizácia: 2024-11-29 (Počet položiek: 2 209 895)
© Copyright 2024 NORMSERVIS s.r.o.