Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM F2332-06(2022)
Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
NORMA vydaná dňa 1.1.2022
Informácie o norme:
Označenie normy: ASTM F2332-06(2022)
Dátum vydania normy: 1.1.2022
Kód tovaru: NS-1070009
Počet strán: 145
Približná hmotnosť: 466 g (1.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM F2332-06(2022) :
This specification covers annular ball bearings intended primarily for use in instrument and precision rotating components. Annular ball bearings for instrument and precision rotating components shall be of the following types, as specified: type I - deep groove, unflanged; type II - deep groove, flanged; type III - deep groove, unflanged, inner ring extended; type IV - deep groove, flanged, inner ring extended; type V - angular contact, unflanged, nonseparable, and counterbored outer ring; type VI - angular contact, flanged, nonseparable, and counterbored outer ring on flange side; type VII - angular contact, unflanged, separable, and stepped inner ring; type VIII - angular contact, flanged, separable, and stepped inner ring; type IX - angular contact, unflanged, nonseparable, and stepped inner ring. Materials inspection, passivation test, visual inspection, dimensional inspections, radial internal clearance, torque test, ball quality inspection, hardness test, surface roughness test, dimensional stability test, lubricant inspection, and calibration classification inspection shall be performed to meet the requirements prescribed.
Keywords:
ABEC 5P, ABEC 7P, angular contact, barrier coating, bearing void, calibration (classification), contact angle, counterbored outer ring, deep groove radial, extended inner ring, instrument bearing, nonseparable, passivation, precision bearing, separable, starting torque, stepped inner ring,, ICS Number Code 21.100.10 (Plain bearings)
Doplňujúce informácie
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1?This specification covers annular ball bearings intended primarily for use in instrument and precision rotating components. Instrument and precision ball bearings should meet tolerances specified in ABMA Standard 12.2, Instrument Ball Bearings Inch Design for Classes ABEC 5P and 7P. 1.2?Intended UseBall bearings defined by this specification are intended for use in critical components of instrument systems. Such components range from air circulating blowers and drive motors through precision gear trains, gyro gimbals, and pickoffs to rate integrating spin-motors. 1.3?The specification contains many of the requirements of MIL-B-81793, which was originally developed by the Department of Defense and maintained by the Naval Air Systems Command (Navy-AS) in Lakehurst, NJ. The following government activity codes may be found in the Department of Defense, Standardization Directory SD-1.2
1.4?ClassificationAnnular ball bearings for instrument and precision rotating components shall be of the following types, as specified: 1.4.1?Type IAnnular ball bearing, for instruments and precision rotating components, deep groove, unflanged; (See Annex A1 Annex A4) 1.4.2?Type IIAnnular ball bearing, for instruments and precision rotating components, deep groove, flanged; (See Annex A5 Annex A8) 1.4.3?Type IIIAnnular ball bearing, for instruments and precision rotating components, deep groove, unflanged, inner ring extended; (See Annex A9 Annex A12) 1.4.4?Type IVAnnular ball bearing, for instruments and precision rotating components, deep groove, flanged, inner ring extended; (See Annex A13 Annex A16) 1.4.5?Type VAnnular ball bearing, for instruments and precision rotating components, angular contact, unflanged, nonseparable, and counterbored outer ring; (See Annex A17 Annex A20) 1.4.6?Type VIAnnular ball bearing, for instruments and precision rotating components, angular contact, flanged, nonseparable, and counterbored outer ring on flange side; (See Annex A21 Annex A24) 1.4.7?Type VIIAnnular ball bearing, for instruments and precision rotating components, angular contact, unflanged, separable, and stepped inner ring; (See Annex A25 Annex A28) 1.4.8?Type VIIIAnnular ball bearing, for instruments and precision rotating components, angular contact, flanged, separable, and stepped inner ring; (See Annex A29 Annex A32) 1.4.9?Type IXAnnular ball bearing, for instruments and precision rotating components, angular contact, unflanged, nonseparable, and stepped inner ring. (See Annex A33 Annex A36) 1.5?Inch-Pound SpecificationThis specification covers only the inch-pound bearings. 1.5.1?The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Odporúčame:
Aktualizácia technických noriem
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
