Cookies
Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
ASTM F2080-16
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
NORMA vydaná dňa 1.8.2016
Informácie o norme:
Označenie normy: ASTM F2080-16
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.8.2016
Kód tovaru: NS-651579
Počet strán: 8
Približná hmotnosť: 24 g (0.05 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Kategórie - podobné normy:
Anotácia textu normy ASTM F2080-16 :
Keywords:
cold-expansion fittings, compression-sleeves, crosslinked polyethylene, hot- and cold-water distribution, PEX, PE-RT, polyethylene of raised temperature,, ICS Number Code 23.040.40 (Metal fittings)
Doplňujúce informácie
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers cold-expansion fittings using metal compression-sleeves for use with crosslinked polyethylene (PEX) plastic pipe in 3/8-in., 1/2-in., 5/8-in., 3/4-in., 1-in., 11/4-in., 11/2-in., and 2 in. nominal diameters, meeting the requirements of Specification F876 and for use with Polyethylene of Raised Temperature (PE-RT) pipe in 3/8 , 1/2 , 5/8 , 3/4 , 1, 1- 1/4 , nominal diameters meeting the requirements of Specification F2769, whereby the pipe is cold-expanded before fitting assembly. The components covered by this specification are intended for use in residential and commercial, hot and cold, potable water distribution systems or other applications such as municipal water service lines, radiant panel heating systems, hydronic baseboard heating systems, snow and ice melting systems, geothermal underground pipe systems and building services pipe with continuous operation at pressures up to and including 100 psi (690 kPa), and at temperatures up to and including 180°F (82°C). 1.2 Included in this specification are the requirements for materials, workmanship, dimensions, and markings to be used on the fittings and compression-sleeves. Performance requirements are as referenced in Specification F877 for systems containing PEX pipe and Specification F2769 for systems containing PE-RT pipe. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only
to the test method portion, Section 10, of this specification.
Standard Specification for
Copper-Zinc-Silicon Alloy Rod Standard Specification for Electroplated
Engineering Nickel Coatings Standard Terminology Relating to Plastic
Piping Systems Standard Specification for Steel Bar,
Carbon and Alloy, Cold-Finished Standard Specification for Seamless and
Welded Austenitic Stainless Steel Tubing for General Service Standard Specification for Stainless
Steel Bars and Shapes (Includes all amendments and changes
2/22/2024). Standard Specification for Seamless,
Welded, and Heavily Cold Worked Austenitic Stainless Steel
Pipes Standard Specification for Free-Cutting
Brass Rod, Bar and Shapes for Use in Screw Machines Standard Specification for Composition
Bronze or Ounce Metal Castings Standard Specification for Copper Alloy
Sand Castings for General Applications Standard Specification for Automated
Controlled Shot Peening of Metallic Articles Prior to Nickel,
Autocatalytic Nickel, or Chromium Plating, or as Final Finish Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024) Standard Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings Standard Specification for Crosslinked
Polyethylene (PEX) Tubing Standard Specification for Crosslinked
Polyethylene (PEX) Hot- and Cold-Water Distribution Systems Standard Specification for Polyethylene
of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and
Distribution Systems Pipe Threads General Purpose (Inch)
Available from American Society of Mechanical Engineers (ASME),
ASME International Headquarters, Three Park Ave., New York, NY
10016-5990, http://www.asme.org. B16.18 B16.22 Wrought Copper Alloy Solder Joint
Pressure Fittings (Inch) Standard No. 14 for Drinking Water System
ComponentsHealth Effects EN 12164 Copper and Copper AlloysRod for Free
Machining Purposes Available from European Committee for
Standardization (CEN), 36 rue de Stassart, B-1050, Brussels,
Belgium, http://www.cenorm.be. Copper and Copper AlloysWrought and
Unwrought Forging Stock Standard Specification for Seamless
Carbon and Alloy Steel Mechanical Tubing Standard Specification for
Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and
Shapes Standard Specification for Copper and
Copper-Alloy Die Forgings (Hot-Pressed) |
Odporúčame:
Aktualizácia zákonov
Chcete mať istotu o platnosti využívaných predpisov?
Ponúkame Vám riešenie, aby ste mohli používať stále platné (aktuálne) legislatívne predpisy
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
