Pozor!

Vo Vašom prehliadači nie je aktuálne povolené spúšťanie Javascriptu. Je možné, že niektoré funkcie nebudú fungovať správne. Pre plnú funkčnosť internetového obchodu odporúčame povoliť Javascript. Tu sú inštrukcie ako povoliť JavaScript vo Vašom webovom prehliadači.

Zobrazovaná mena: €

Zobrazenie ceny: bez DPH

Doplňujúce informácie

ASTM F1483-23

Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

NORMA vydaná dňa 15.2.2023

Jazyk
Prevedenie	Online zabezpečené PDF - 63.00 € Norma a Redline - Online zabezpečené PDF - 75.60 € Tlačené - 63.00 € Tlač + redline - 75.60 €
Dostupnosť	SKLADOM
Cena	63.00 € bez DPH
63.00 €

Informácie o norme:

Označenie normy: ASTM F1483-23
Dátum vydania normy: 15.2.2023
Kód tovaru: NS-1103634
Počet strán: 6
Približná hmotnosť: 18 g (0.04 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM

Tlač

Odoslať známemu

Otázka

Kategórie - podobné normy:

Trubky z plastické hmoty

Anotácia textu normy ASTM F1483-23 :

This specification covers requirements for materials, dimensions, sustained pressure, accelerated regression testing, burst pressure, flattening, impact resistance, workmanship, and methods of marking for oriented poly (vinyl chloride) (PVCO) pipe for pressure applications. PVCO pipe shall be joined using elastomeric seals (gaskets). The joint shall meet the requirements of a certain specification and the elastomeric seal shall meet the requirements of another specification. The PVCO shall not be joined by solvent cementing. Poly (vinyl chloride) plastics used to make PVCO pipe meeting the requirements of this specification are categorized by means of two criteria, namely (1) short-term strength tests; and (2) long-term strength tests. The pipe shall be homogeneous throughout and free from visible cracks, holes, foreign inclusions, or other defects. The pipe shall be as uniform as commercially practicable in color, opacity, density, and other physical properties.

Keywords:

PVCO oriented polyvinyl chloride, pipe pressure ,, ICS Number Code 23.040.20 (Plastic pipes)

Doplňujúce informácie

1. Scope

1.1?This specification covers requirements for materials, dimensions, sustained pressure, accelerated regression testing, burst pressure, flattening, impact resistance, workmanship, solvent cement joint testing, and methods of marking for oriented poly(vinyl chloride) (PVCO) pipe for pressure applications.

1.2?The PVCO pipe shall be joined using either elastomeric seals (gaskets) or solvent cement with primer. The gasketed joint shall meet the requirements of Specification D3139 and the elastomeric seal shall meet the requirements of Specification F477. The solvent cemented joint shall meet the requirements of 5.3.3.

1.3?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4?The following safety hazards caveat pertains only to the test method portion, Section 7 of this specification: 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

Fed. Std. No. 123	Marking for Shipment (Civil Agencies)
D883-26a	Standard Terminology Relating to Plastics (Includes all amendments and changes 6/15/2026).
F412-25a	Standard Terminology Relating to Plastic Piping Systems (Includes all amendments and changes 10/8/2025).
F477-14(2021)	Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
D618-21	Standard Practice for Conditioning Plastics for Testing
D1784-25	Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D1600-18	Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)
D1599-18(2024)	Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D1598-24	Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D3139-19(2025)	Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
D2122-22	Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D2837-25	Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
D2444-25	Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2152-23	Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
MIL-STD-129	Marking for Shipment and Storage
NSF Standard No. 14
	for Drinking Water System ComponentsHealth Effects
	Policies and Procedures for Developing Recommended Hydrostatic Design Stresses for Thermoplastic Pipe Available from Plastics Pipe Institute (PPI), 105 Decker Court, Suite 825, Irving, TX 75062, http://www.plasticpipe.org.

Odporúčame:

Aktualizácia technických noriem

Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.

Chcete vedieť viac informácií ? Pozrite sa na túto stránku.

Tu máte možnosť prispôsobiť si nastavenia súborov cookies v súlade s vlastnými preferenciami.

Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov.