Potrebujeme váš súhlas na využitie jednotlivých dát, aby sa vám okrem iného mohli ukazovať informácie týkajúce sa vašich záujmov. Súhlas udelíte kliknutím na tlačidlo „OK“.
Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
Automaticky preložený názov:
Štandardná skúšobná metóda pre stanovenie odolnosti proti oderu, obrazov vyrobených z kopírok a tlačiarní (Taber Method)
NORMA vydaná dňa 1.10.2011
Označenie normy: ASTM F1478-06(2011)
Poznámka: NEPLATNÁ
Dátum vydania normy: 1.10.2011
Kód tovaru: NS-50439
Počet strán: 5
Približná hmotnosť: 15 g (0.03 libier)
Krajina: Americká technická norma
Kategória: Technické normy ASTM
Keywords:
abrasion resistance, image permanence, smudge resistance, taber abrasion, ICS Number Code 35.180 (IT terminal and other peripheral equipment)
Significance and Use | ||||
5.1 The degree of image abraded from a copy or printed image may be affected by various factors, including the type of machine, condition of the machine, supplies employed, time since imaging, and environmental conditions. As many as possible of these variables should be controlled during the test. If available, a control sample with known characteristics should be run along with the test samples. 5.2 This test method may be used to determine image resistance to damage or deterioration as a result of exposure to abrasive forces, such as automated document handling devices. 5.3 This test method may be used for control of product quality, comparative analysis of machines, comparative analysis of imaging components, as well as a research and development tool. 5.4 This test method is adaptable to images produced from most nonimpact printers and copiers. The printers shall be capable of utilizing the available program to produce the specified image. 5.5 If the user wishes to simulate the type of damage or smudge resulting from paper rubbing against the printed image or from normal handling, consideration should be given to using either the Crockmeter Method (Test Method F1319), the Sutherland Rub Method, or the Gavarti GA-CAT Method. |
||||
1. Scope | ||||
1.1 This test method covers a procedure for determining the amount of image abraded from the surface of a document. 1.2 This test method may be used to evaluate the abrasion resistance of images produced by business imaging products, including nonimpact printers, thermal transfer printers, and copiers. The machine shall be capable of producing the specified image. 1.3 Testing focuses on determining the amount of imaged material removed, resulting from forces which impart a rubbing or grinding action principally on the top surface of the image. 1.4 Comparison may be made between various imaging devices or the image-producing components of an individual machine. 1.5 Other test methods employing the Crockmeter (Test Method F1319), Sutherland Rub Tester, and Gavarti GA-CAT may be employed to evaluate the smudge and abrasion characteristics. Results by these test methods are not necessarily equivalent to those obtained by this test method. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Historická
1.4.2013
Historická
1.10.2009
Historická
1.11.2011
Historická
1.1.2010
Historická
1.10.2011
Historická
1.2.2009
Chcete mať istotu, že používate len platné technické normy?
Ponúkame Vám riešenie, ktoré Vám zaistí mesačný prehľad o aktuálnosti noriem, ktoré používate.
Chcete vedieť viac informácií ? Pozrite sa na túto stránku.
Posledná aktualizácia: 2024-12-22 (Počet položiek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.